1967 GT500 Brake Parts Source?

[Coast2CoaStang]

Hi all. I usually lurk/post in the 5.0 Fox section. I am trying to help my friend get his 1967 GT500 going after more than 30 years of being dormant. We are trying to find a good source for replacement brake parts and hardware.

His car still has all the factory brake parts. He would like to get stock replacements or get his stock calipers rebuilt. Any help is greatly appreciated.

 

[Realmongo]

Try these guys:

http://applehydraulics.com/brakes.htm

 

[Coast2CoaStang]

Thanks for the link. He has the Kelsey-Hayes, and the rebuild prices are reasonable to me.

 

[Rick66embglcovt]

Hi all. I usually lurk/post in the 5.0 Fox section. I am trying to help my friend get his 1967 GT500 going after more than 30 years of being dormant. We are trying to find a good source for replacement brake parts and hardware.

His car still has all the factory brake parts. He would like to get stock replacements or get his stock calipers rebuilt. Any help is greatly appreciated.

 

[horse sence]

i rebuild the calipers my self, its not hard to do . the hardest part is getting the pucks out somtimes, i use a 1 x4 between the pucks and hit them with air. they will blow right out. do not get your fingers in there

 

[Rick66embglcovt]

There are several links out there to support your classic mustang.

http://www.superiormustangparts.com/1966-mustang-parts.asp

http://www.cjponyparts.com/mustangp...stang+Parts&utm_content=Classic+Mustang+Parts

Good luck with your classic!

 

[Realmongo]

Thanks for the link. He has the Kelsey-Hayes, and the rebuild prices are reasonable to me.

The real value is the original parts are re-sleeved with brass so no more rusting problems. I was thinking of driving over there with my original 64-1/2 master cylinder.