1969 / 1970 Window Regulator to Door shell Nut / Bolts kit or sizes?

[69machmike]

Hi,

I'm replacing the entire inside of my 1969 mach 1 doors and have a few technical questions.

The bolts and nut to attach the window regulators to the inner door shell. What length are they? My guess is they are:


1/4" - 20 maybe 1/2" long? I do not have the originals to compare them to. There seems to be a few sizes so I'll ask that if you know them please provide the sizes.


Anyway, I am struggling to find the stock nuts and bolts for these in a kit (no AMK, all the suppliers don't have them) so I'm asking for what anyone is using as a replacement, or if you know of a supplier that has them.

Thanks!
Mike

 

[horse sence]

1/4 inch bolts ,1/2 inch long if i remember correctly

 

[horse sence]

I have a bucket of door bolts off my 69 ,i will see if i can get a picture

 

[7773ER]

horse sence, I realize this thread is 9 months old but do you still have some of those bolts and nuts kicking around for a ‘69 window regulator? I DID finally find one piece I was missing…it took me ages to track one down, nobody makes an aftermarket piece as far as I know. I’ll attach the shop manual pic of it.