1986 speed density to mass air

Discussion in 'Fox 5.0 Mustang Tech' started by triplewhite86, Jul 31, 2007.

  1. i have a mass air computer and a meter how can i do the conversion myself without spending a ton of money.
  2. this is the tech article i used and i haven't had ANY problems! just make sure to get the eec-iv terminals you're going to need to run the wires to the eec connector. they're almost impossible to find, i had to go down to a local junk yard and hack the entire eec connector off a 4 cyl car. so now i have a bunch of eec-iv terminals! iirc, you need 4. send me a pm if you need them, i'll give you some for free.