1994 Gt heads needed

[Cody.B1]

Looking for a set of cylinder heads for a stock bottom end 302. The gt40 heads i picked up dont seem like there worth the hassle to re-spring for a cam and such. New heads are not in my budget. Thanks.

 

[General karthief]

Budget springs and seals are around $150, I just googled sbf valve springs and found a bunch of choices, not that bad.

 

[mikestang63]

dude, if you cant afford a decent set of valve springs, what makes you think you can afford a decent set of heads?

 

[RangerJoe]

Not anymore expensive to do gt40 heads then it is to do E7's. They all require the same checks, flatness, valve jobs, seals, springs, etc.

Joe

 

[Mustang5L5]

With stock cam. Add $20 for seals

https://www.alexsparts.com/sb-ford-gt40-drop-in-valve-springs-kit-hyd-roller-550-lift-vsk7h48-13/

Or up to .600 lift cams
https://www.alexsparts.com/sb-ford-gt40-600-lift-max-output-ii-drop-in-valve-spring-kit-hyd-roller/


Or you want to pick your own.
https://www.alexsparts.com/categories/VALVE-SPRING-KITS/

 

[CarMichael Angelo]

dude, if you cant afford a decent set of valve springs, what makes you think you can afford a decent set of heads?

I think it's more about him thinkin that a pair of GT40's aren't worth the investment to bring them up to speed, as opposed to not being able to afford the springs to do it.

 

[Cody.B1]

I can afford the valve spring that's not the problem. With the cam kit"$700" with everything and the intake and heads "$300". I could just get a set of set of heads "$1,000-1500" new and just buy the small cam kit.

 

[Cody.B1]

Just seeing if anybody had used good heads for a bit cheaper

 

[General karthief]

Post it in the classified.