Roush 2000 Saleen - Supercharger oil Check.

Boostin S281

New Member
Jul 24, 2007
27
1
1
Clayton, MO
How do i check/replace oil in the Series 1 supercharger? i want to maybe replace to oil or inspect it make sure it has enough but i don't know where to start with it. Does anyone have any pictures or instructions on how to do this? Also, what kind of oil goes in there...

I installed the chicane pulley and the Focus fuel pump so i just want to make sure the SC is ok. I can't hear it anymore since i have the h-pipe, the darn thing is too loud i can't hear my supercharger whine :(

Thanks guys...
 
  • Sponsors (?)


When you changed the pulley, did you put on a smaller belt ?
If not, that is most likely why you aren't hearing the whine of the SC.
Smaller pulley = smaller belt!
Not sure on checking the oil on the series 1, but I'm sure someone on here will chime in on that!


See Ya Bill
 
The Series 1 is sealed - maintenance free, the Series 2 had an oil fill/change/plug added to the front.

The front pully bearings went bad also, you might check that.

Series 2 is on the left

DSC07940%20copy.jpg