2005 4.0 auto TO 2009 4.6 manual

Nick6425white

New Member
Dec 2, 2020
2
0
1
24
Oklahoma
I swapped an 09 4.6 with manual trans into an 05 that was a 4.0 with an auto. I swapped body and engine/trans harnesses and it will not crank. Has anybody had this issue after doing the swap?
 
  • Sponsors(?)


Nick6425white

New Member
Dec 2, 2020
2
0
1
24
Oklahoma
Did you swap the computer, or get a proper computer for the engine/trans configuration?
Yes I did, I swapped everything from the donor car except for the dash harness, I had to re pin c210 for a pats code. I am not getting communication from the pcm to pin 86 on the starter relay