2011 GT Stock Dyno Run

[Ronin38]

Hi guys,

My SCCA group had a "Dyno Day" today, so I got a FREE shot at the dyno! My Mustang is a 2011 GT, bone stock, 89 oct. gas. (91 would be stronger!) WX was about 50 deg. (felt a lot colder!), 15% humidity, Dynojet Dyno. Run made in 3rd gear because it's an auto-trans, so the numbers (esp. torque) will be a little lower than usual:

353 WHP / 326 TQ!

[+17% for drivetrain loss = 413 HP!]

6700 rpm = 110 mph in 3rd! The HP curve is incredibly smooth, too. The tech. driving it on the dyno. has named my car "Crown Royale" because it felt so smooth! haha

There was another guy there with an '08 SRT Charger, with an Intake and 93 Tune on it: 355 HP (I forget his torque number, sorry).

I think I'll keep it.

 

[642mx]

Interesting... I was wondering what the 5.0 with auto tranny's did on the dyno. It seems like every dyno chart I've found was a manual shift 5.0.

 

[Sparty92]

I'm gonna dyno my car in the next month or so. I have 3.73s and a stick, and I've "tested" 3rd gear...it only does about 80-85mph.

 

[Ronin38]

Adding on to my own thread, instead of starting a new one...

Went to the Test n' Tune at the local drag strip tonight!
Bone stock; 1/2 tank of gas+me = 3847. Stock tires, stock air, traction control set to Sport Mode. Track DA = 505.

1st Run: RT=.77; 60'=2.13; 1/4 [email protected] mph!

2nd Run: RT=.76; 60'=2.04; 1/4 [email protected] mph!
Corrected for DA = 12.84 @ 111.17 MPH
Definitely had wheel spin in 1st and 2nd on this run!

I'm happy with it.

Edit: Forgot to mention... I reset the Avg. Fuel Mileage before my runs... 3 mpg!!

 

[642mx]

Those are really good times! We have an 1/8th mile up the road from my house, I've been wanting to try it.