315/35-17 Nitto Nt05r with tailpipes?

[5ohRobQ]

Hey guys i have a 89 fox that was a gt but now running all LX bumpers. Just put 315s in the rear and was hoping to get rid of my slp dumps and go with flowmaster 44s with 2.5” Lx tail pipes. Any one have this set up? Curious to see if they rub before i order the tailpipes. Thank you !

 

[Cheapskate207]

I have 315 nitto g2’s and 10.5 Wide Bullitt replicas. Had to ditch the 2.5 tailpipes... they rubbed hard. I couldn’t dent them enough. Flowmaster 3 inch will work.

 

[5ohRobQ]

I have 315 nitto g2’s and 10.5 Wide Bullitt replicas. Had to ditch the 2.5 tailpipes... they rubbed hard. I couldn’t dent them enough. Flowmaster 3 inch will work.

Okay cool ill look into those. I seen them on AM but figured the 3” would be even worse. Are they routed better ?

 

[Cheapskate207]

Yes.

 

[TOOLOW91]

Okay cool ill look into those. I seen them on AM but figured the 3” would be even worse. Are they routed better ?

They hug hard and come no where near the tire anymore .

 

[95BlueStallion]

They hug hard and come no where near the tire anymore .

Hey, I think that gas station is closed. You might be there a while.

 

[TOOLOW91]

Hey, I think that gas station is closed. You might be there a while.

Damn no wonder I couldn’t find anyone