Well after buying a 92 notchback with the 5.0 and a t5 for 2500 bucks with 90000 miles on it I got it running. Car had a bad computer. So I was talking to my gfs dad and he goes well I have a 351c in the shed if you want it! I was like hell ya. So now I have the motor all broken down and ready to head off to the machine shop. This is what im planning let me know what you think and what i should be done. I am going to drive this car on the street and the track so it has to hual ass or i would have stuck with the 5.0. basicly I want a bad ass street car.
Buying a stroker kit to a 408 or something else mabye smaller so i dont have to go .30over
Sending block out to get clearenced and bored for stoker kit. Helps alot with lowend tourqe I read
I have that figured out now I move on to the part that looses me..........Heads!!!!!valves, springs lifters everything on the top!!
I have seen alot of people praising the aussie heads and their the same price as some aftermarket heads. So is that what i should do? I want to get 400 450 rwhp and also stick a bottle on it for 150 to 200(just for looks of course). What kind of pistons should i be looking at for this motor,and what compression ratio should I be at? Any help to shed some light on this would be awsome I want to build it myself and save some money instead of paying someone to do it I can do it and buy some better parts. Thanks
Buying a stroker kit to a 408 or something else mabye smaller so i dont have to go .30over
Sending block out to get clearenced and bored for stoker kit. Helps alot with lowend tourqe I read
I have that figured out now I move on to the part that looses me..........Heads!!!!!valves, springs lifters everything on the top!!
I have seen alot of people praising the aussie heads and their the same price as some aftermarket heads. So is that what i should do? I want to get 400 450 rwhp and also stick a bottle on it for 150 to 200(just for looks of course). What kind of pistons should i be looking at for this motor,and what compression ratio should I be at? Any help to shed some light on this would be awsome I want to build it myself and save some money instead of paying someone to do it I can do it and buy some better parts. Thanks