Expired 4.6 DOHC Stroker

Discussion in 'Engine and Power Adder Parts' started by TurboCobra97, Nov 20, 2012.

Thread Status:
Not open for further replies.
  1. Teksid Aluminum 4.6 Block stroked to a 5.0
    Kellogg Crank
    Manley Rods
    Diamond Pistons
    Ported C Cobra Heads
    FRPP Back Cut valves
    Comp Springs and retainers
    ARP Head and Main Studs
    9.3:1 Compression, was building it for boost
    New chains, tensioners and guides
    Accufab billet Crank trigger
    Melling Billet oil Pump
    Cometic Head Gaskets
    New Pickup
    ATI Balancer
    MMr Billet IMRC deletes
    Bronze valve guides
    Cobra intake with shortened runners
    So much more to list
    I have 95% of the parts needed to complete the build. Needs cams and an oil pan. Just don't have the time to finish.
    All machine work was done by Jeff Lawrence Race Engines. Absolutely perfect clearances. Shoot me a text. 6312786801. I have so much invested. Asking 6000. Im Neg tho. I have so many pictures. Give me your email if interested. I would sell heads separate from short. rsz_img_0069.jpg rsz_img_0076.jpg rsz_img_0079.jpg rsz_img_0371.jpg rsz_img_0376.jpg rsz_img_0338.jpg rsz_img_0074.jpg
  2. Will Part out, Im very reasonable...
  3. how much for pistons?
Thread Status:
Not open for further replies.