is there a FAQ for a fox body 5 lug swap?? I have the axles and drums for the rear but insure what rotors to use up front for newer (bullitt,cobra R) wheels
5 lug swap
- Thread starter Project 77
- Start date
-
Sponsors (?)
Shakerhood
Dirt-Old 20+Year Member
There are tons of write ups on the Brake Conversions. You will need SN95 Spindles up front to use Bullitt Wheels.
Bullit and Cobra R wheels you can get away with using the Mark VII rotors and hubs. The center caps still go on.
But if you want to run different wheels and upgrade your stopping power. Go with 94-95 spindles and rotors, and the 99-04 PBR calipers, brakets, pads, and flex lines. A reducer union on the passenger side will be needed for the brake line to the metal hard line, but it only cost me $1.37 at Advanced Auto Parts. Easy swap you can do in one night.
But if you want to run different wheels and upgrade your stopping power. Go with 94-95 spindles and rotors, and the 99-04 PBR calipers, brakets, pads, and flex lines. A reducer union on the passenger side will be needed for the brake line to the metal hard line, but it only cost me $1.37 at Advanced Auto Parts. Easy swap you can do in one night.
FoxBodyGT
New Member
Similar threads
