65-66 parts, also EFI conversion parts!

Discussion in 'Engine and Power Adder' started by LUCAFU1, Nov 6, 2006.

Thread Status:
Not open for further replies.
  1. stock 1970 d0oe heads (like gt-40s) http://cgi.ebay.com/ebaymotors/ws/e...item=280046042240&ssPageName=ADME:L:LCA:MT:11

    E7TE Heads

    2 65-66 mustang fenders, sand blasted with alittle filler. great shape.

    new 66 mustang black dash pad (stored 6 years so its dirty).

    2 fron 66 mustang seats, needs upolstery.

    complete 66 mustang wiring, all in great shape except for the rear (can be repaired).

    complete 66 mustang A/C system w/ heater and controls. all brackets and new P/S pump (no pulley). (condensor has very minor damage on the fitting and is easily repairable)

    2 complete ford 9" rear third members, both open diff. 3.10 and 4.11 gear rings.

    set of front and rear 65-66 mustang bumpers.

    65-66 mustang front and rear valance.

    set of 69-70 mach1 seats, needs upolstery.

    I also have almost everything you would need to convert to EFI.
    5.0l upper and lower intake, throttle body, EGR spacer, fuel rails complete with regulator and 16 19# injectors, acc. brackets with water pump, alternator, a/c compressor, power steering pump (pulley removed but included), Timing chain cover, damper, and a A9P PCM in great shape.
    All thats needed is a harness, tensioner, and a few little things.

    I have alot of other parts also so let me know what you need. I can ship most items, even the fenders ($$$$).

    Let me know if you have any questions. It will end up on ebay if not sold soon.

    PM me or EMAIL me at [email protected] with what you want and price. Need a price so I can move this stuff out.

    No reasonable offer refused, but please no low balling.

    Thank you!

  2. I would like to buy the passenger fender...
  3. sorry for the late reply. they are on ebay. i want to try and keep them together since i have a box for both. if they dont sell i will split them up for you. thanks

  4. I'd like the full AC set up. Everything I can get so that my '65 will have AC. Will it work with a 6 cylinder system?
  5. how much for the EFI setup
  6. shifter lever

    Do you happen to have a shifter lever for a 3 speed manual transmission, 1966
Thread Status:
Not open for further replies.