94/95 Flex Lines, different sizes?

[hemi_fan]

I am trying to install my 66mm calipers from a 94/95 mustang onto my fox, but one of the flex lines refuses to thread onto the brake line fitting... I tried it on both sides of the car, and the threads seem to be slightly smaller than the fox flex lines, and one of the 94/95 flex lines. Anyone else ever had this problem? Possible solutions?

 

[hemi_fan]

Just did some research... read about "The drivers side soft-line to hard-line attaches directly while the passenger side requires a Weatherhead 7828 fitting" Anybody know where I can pick one of these fittings up? Will I have to cut and re-flare my brake line to get this on, or is it an adapter?

 

[dbdragracing]

I just bought one off ebay for like $5. It just screws in. Later.

 

[bill302]

click on link these people know and can get you what you need....
http://www.maximummotorsports.com/

 

[bill302]

here is another link...this is what you need...
http://cgi.ebay.com/ebaymotors/Must...ryZ33563QQssPageNameZWD1VQQrdZ1QQcmdZViewItem

 

[hemi_fan]

k, thx guys