99-04 / 96-98 4V guys: what track times do you run with minimal mods?

[fiveoho]

just curious to see what 1/8 or 1/4 mile times are with minimal mods such as exhaust, gears, programmer, cai and pullies. also, if you have dyno numbers list those as well. Thanks

 

[BennyBlown2v]

Low 13's, occasionally mid-high 12's with a tire and driver. My buddies with 96-98 cobras run 13.0's and 12.90's with gears, exhaust, tune, imrc delete, and tires.

 

[04fullitgt]

my 03 mach ran 13.4 with a catless xpipe and a JLT RAI with a crappy 2.2 60'

 

[Black_02_GT]

14.2 in the 1/4... X pipe, Weld-in Flows, Removed Silencer. This was with bald kumho's and very minimal track experience

 

[StangYellow]

O/R x,catback, pullies, timing adjuster, 4.10's and like 2.2 0-60's and i run 13.7 - 13.8 @ 102 or so. New England Dragway. Not sure of the elevation, not much. Havent been there since i got the intake plenum

 

[fiveoho]

O/R x,catback, pullies, timing adjuster, 4.10's and like 2.2 0-60's and i run 13.7 - 13.8 @ 102 or so. New England Dragway. Not sure of the elevation, not much. Havent been there since i got the intake plenum

i would be happy with a car capable of 13.8s with just those few mods. that would be about a 8.8 1/8?

 

[fiveoho]

Low 13's, occasionally mid-high 12's with a tire and driver.

a 4v right? assuming gears, exhaust and a programmer?

 

[fiveoho]

14.2 in the 1/4... X pipe, Weld-in Flows, Removed Silencer. This was with bald kumho's and very minimal track experience

stock gear?

 

[deftsound]

ran a 13.9 with nothing but an offroad h-pipe and weld in mufflers

 

[MyBloodRunsBlue]

13.73 @ 101 with 4.10s, xpipe, and programmer

 

[BurningRubber]

13.92 @ 100.

Intake, throttle body/plenum, x pipe, catback, gears. Stock tune.

With the tune tweaked now and more of the driver mod the car should go 13.5 easy on DR's.

 

[fiveoho]

these cars look to be VERY capable of running high 13s with very few mods.

what does a stock motor make on the mustang dyno? 215ish?

 

[Black_02_GT]

stock gear?

stock 3.27s

Found my timeslip.

RT: 1.08
60': 2.2
330': 6.11
1/8: 9.24
MPH: 79.16
1/4: 14.15
MPH:100.58

 

[BennyBlown2v]

a 4v right? assuming gears, exhaust and a programmer?

yeah 96-98 4v, thats what i was talking about, just like my second sentance explains

 

[BurningRubber]

these cars look to be VERY capable of running high 13s with very few mods.

what does a stock motor make on the mustang dyno? 215ish?

They are capable of that easy if you can drive.

Stock PI GT's with a 5 speed usually put down 230-235ish on average, some higher, some lower. Auto's a little less as expected. They still put down decent tourqe though, usually somewhere in the 270-280+ range.

With the mods listed in my sig. my car put down 258rwhp and 314 lb ft to the ground.

 

[CobraRed_96_GT]

They are capable of that easy if you can drive.

Stock PI GT's with a 5 speed usually put down 230-235ish on average, some higher, some lower. Auto's a little less as expected. They still put down decent tourqe though, usually somewhere in the 270-280+ range.

With the mods listed in my sig. my car put down 258rwhp and 314 lb ft to the ground.

he said mustang dyno tho

 

[flstang65]

13.5 with the mods in my sig. Done at Orlando Speed World Dragway.

 

[Flghtmstr1]

13.6 at 103 at Cecil County Dragway with only catted x-pipe, weld-in flows, pulleys, and a tune. Avon M550 All Season 245/45R17 tires, 2.08 60' time. Car is an auto.

I haven't been to the track since all the other mods in my sig.

 

[Mach1Run]

my best so far is a 9 flat in the 1/8th. but I suck since I have only got a about 8 passes in my lifetime lol.

 

[fiveoho]

They are capable of that easy if you can drive.

Stock PI GT's with a 5 speed usually put down 230-235ish on average, some higher, some lower. Auto's a little less as expected. They still put down decent tourqe though, usually somewhere in the 270-280+ range.

With the mods listed in my sig. my car put down 258rwhp and 314 lb ft to the ground.

i think i would be happy with that, given just the few mods you have. is that mustang dyno or dynojet?