Anyone Able To Recommend A Bodyshop/painter In Central Va?

NotMyStang

New Member
Oct 14, 2003
25
1
4
I have had a '68 Shelby coupe clone sitting idle in another another shop in Orange, VA for the past year. I think it's well past time to look for someone else.

I live in Richmond, VA (West end), but anywhere with in 60 miles would be fine. I presently drive over an hour to see a car not get done...

Work in progress that needs to be finished:

Fender flaring, fiber glass finishing, minor custom fiber glass work to clean up the rear Shelby taillight panel, and gap work still needs to be completed. I also had custom brake ducts made from metal, but I think only one side has been completed.

Then paint.

Anyone know of someplace that can help me out?

Thanks.
 
  • Sponsors(?)


Thread starter Similar threads Forum Replies Date
N Looking To See If Anyone Is Able To Recommend Shelby-like Fiberglass 1965 - 1973 Classic Mustangs -General/Talk- 2
huRACEmentPSR is anyone able to do this? Fox 5.0 Mustang Tech 10
281pony Anyone able to lend a hand possibly? Regional Forums and Event Information 24
WashingtonStang Anyone able to run a carfax for me? =) Regional Forums and Event Information 1
B Anyone done the 351W swap? I need some info. 1996 - 2004 SN95 Mustang -General/Talk- 1
C Power estimates anyone? 1994 - 1995 Specific Tech 3
D Can anyone adjust my tune for 42lb injectors? SCT X4 tuner Digital Self-tuning Forum 1
P AOD problem anyone with experience? Fox 5.0 Mustang Tech 28
Andresquintana.mma Fox Anyone know what heads these are 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 25
Andresquintana.mma Fuel Anyone know what fuel injectors these are? Fox 5.0 Mustang Tech 5
Itstiller WTB/Trade Anyone selling Bassani X pipe? Exhaust Parts 0
C Anyone else like to drive twisty roads? 2005 - 2014 S-197 Mustang -General/Talk- 6
A Can anyone tell me whats up with this exhaust sound? Mustang Sound & Shine All 0
silverlx50 Engine Does anyone have a picture of the O2 sensor harness orange ground wire? Fox 5.0 Mustang Tech 5
Grn92LX Digital Tuning Anyone know the distance between the injector and valve seat? Fox 5.0 Mustang Tech 0
2000xp8 Anyone fit 2 child seats in the back? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 30
L Engine Anyone know where this belongs to? Fox 5.0 Mustang Tech 1
J Progress Thread ANYONE INSTALLED A 1997 COBRA REAR END ASSEMBLY IN 65 COUPE? 1965 - 1973 Classic Mustangs -General/Talk- 3
M Brakes Does anyone know specific casting numbers on 1989 GT O.E. Calipers? Fox 5.0 Mustang Tech 11
P Fox Has anyone ever used sn95 emission valve solenoids in a foxbody. 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 0
96pushrod Anyone else have a copilot 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 40
1320stang I'm back after a long hiatus.... Not sure if there is anyone still around that even remembers me.... 1965 - 1973 Classic Mustangs -General/Talk- 9
H Anyone have any info on putting a 86 svo doghouse on a 93 convertible? The Welcome Wagon 0
H Anyone ever heard of putting an entire SVO front doghouse on a 93 convertible? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 56
derek2079 Can anyone tell me what noise this is coming from my engine bay? VIDEO INSIDE 1965 - 1973 Classic Mustangs -General/Talk- 7
J Does anyone know where this wire goes? Other Auto Tech 28
kiddiccarus Does anyone customize the interior of the 94-95? I am running into brick walls 1996 - 2004 SN95 Mustang -General/Talk- 0
Red50Fox Anyone familiar with SSTUBES.com? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 3
90limited Anyone know if MAC is still shipping parts 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 36
BMan5150 Anyone have the optional Ford Safety Package? 2015+ (S550) Mustang -General/Talk 0
R Can anyone ID these old Ford disc brakes? 1965 - 1973 Classic Mustangs -General/Talk- 5
S Setting Up a Paint Booth in Your Garage - Anyone Tried These The Welcome Wagon 0
M Drivetrain Vibration In Every Gear T-5 Tremec! Fox 5.0 Mustang Tech 4
J can anyone measure foxbody and notchback rear window size? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 17
jenrik Anyone still use this? SN95 4.6L Mustang Tech 9
revhead347 Has anyone ever sent in an instrument cluster for repair? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 9
Mstng93SSP Has anyone used the tool to hold lifters up for cam change? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 28
Reddevil91 93 cobra w whaaaaat? Anyone else seen this build! 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 77
D Anyone have part number for 10th anniv carbon pattern shift knob? SVT Tech Forum 0
ndfox92 Fox does anyone have a victor efi intake for a 351w they want to part with? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 0
G Suspension Can anyone ID my spindle year? Fox 5.0 Mustang Tech 3
J Electrical can anyone help ID these Fox 5.0 Mustang Tech 0
G Has anyone used this header on their I-6 ? 1965 - 1973 Classic Mustangs -General/Talk- 0
silverlx50 Wheels-Tires Anyone running 315/30/18 tires? Fox 5.0 Mustang Tech 3
M Does anyone know what the hole to the left of the oil pressure sender is for?? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 6
S Anyone swap a 347 stroker in a 94-95? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 16
B Was rear-ended, anyone have market value comps? What is it Worth?!?!? 2
skiwesser11 Engine Anyone (still) running a single fogger nozzle or TB plate nitrous system? Fox 5.0 Mustang Tech 29
J Anyone ever replace their own rear glass in a Foxbody Gt? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 0
Similar threads