Anyone Used One Of These Radiator Hold Downs With The Griffin 31x19?

  • Sponsors(?)


FastDriver

My dad had a bra
SN Certified Technician
Sep 5, 2001
4,541
1,245
214
Seaside, CA
I have not used one of them, but it looks good to me. I'll take one in gloss black, please.

To answer the OP, I use the stock brackets on my 31x19 Ron Davis radiator. I used a little rubber tube to keep the radiator from rocking back and forth, but it's not a clean solution.
 

Bryan83taco

Active Member
Feb 4, 2003
554
40
39
SF Bay
OP, Can you post pics when you get it on? I have one of these on my list, but this one is cheaper than the UPR and comes in a variety of colors. I'm thinking black.

Thanks
 

92GreenGT

PEAT
Founding Member
Jul 18, 2002
2,085
0
46
33
Big Stone Gap, VA
www.fullthrottleforums.com
Sorry for the delay, I also removed the two bolts on top of the air bag sensor. Also apologize for the horrible picture I'm posting but cell phones and bright light doesn't work(no camera does!!!) but anyways:

IMG_20110831_152734.jpg


I also put a piece of foam style tape under the lip to make sure it doesn't rub any holes in anything being metal to metal like it was. Overall, worth the $2x I paid, I don't think I could of made one for that.:flag:

-Edit-
I bought that distributor from the parts store and it had no place to put wires on it!!!!! ;)
 

Attachments

Bryan83taco

Active Member
Feb 4, 2003
554
40
39
SF Bay
thanks for posting pics man, they look good. I sent the seller a question asking the difference between their $17 and $20 dollar ones.

I'm gonna pick up a black one.
 

92GreenGT

PEAT
Founding Member
Jul 18, 2002
2,085
0
46
33
Big Stone Gap, VA
www.fullthrottleforums.com
I think u got ripped off... Are you running AEM? what coil packs are you using?
Yep, truck coil packs. Wish I had a fancy way of mounting them and have them look good without changing intakes. I was going to mount them on the end of the exploder intake but never could figure out what I would do on the passenger side so I mounted them on the strut towers until I change intakes down the road.

I think I heard AEM quit making and supporting the EPM now, lol. So I expect mine to go out any day since that's usually how AEM stuff does.
 

Sharad

ALWAYS choose the V over the P!!! Wait... what?
Site Sponsor
Jan 5, 2011
1,563
475
94
Fort Myers, Florida
i run a UPR one, which is similar/same. i had to notch out a section to fit my airbag crash sensor.
Me too, but no airbag on my '89.

I have not used one of them, but it looks good to me. I'll take one in gloss black, please.

To answer the OP, I use the stock brackets on my 31x19 Ron Davis radiator. I used a little rubber tube to keep the radiator from rocking back and forth, but it's not a clean solution.
I used an extra piece of the door jam foam strip that I had in the garage. I don't know what they call that stuff. It's the gasket that goes all the way around the door opening, between the door and the body. I had an extra piece, and it clamped onto the radiator hold down perfectly! It holds my Fluidyne radiator nice and tight, without scratching anything.

almostready.jpg
 

Attachments

Thread starter Similar threads Forum Replies Date
G Anyone using a Summit Aluminum radiator? Fox 5.0 Mustang Tech 0
M Radiator fans are dead, anyone used Mishimoto fan shroud? Fox 5.0 Mustang Tech 2
J has anyone used this overflow tank for your radiator ? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 2
Davin Anyone with a 347 using the stock radiator??? 1994 - 1995 Specific Tech 13
jbsteven Anyone use the BeCool radiator from Summit? Classic Mustang Specific Tech 29
J Crew Summit radiator and Summit electric fan... anyone use them? Fox 5.0 Mustang Tech 8
65fastback2+2 has anyone used a summit racing aluminum radiator? Classic Mustang Specific Tech 5
GI Joe 97/02 Anyone used a different radiator overflow tank SN95 4.6L Mustang Tech 2
P Fox Has anyone ever used sn95 emission valve solenoids in a foxbody. 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 0
jenrik Anyone still use this? SN95 4.6L Mustang Tech 9
Mstng93SSP Has anyone used the tool to hold lifters up for cam change? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 28
G Has anyone used this header on their I-6 ? 1965 - 1973 Classic Mustangs -General/Talk- 0
nickyb Anyone use strech rakboots ? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 2
Grn92LX Drivetrain Anyone using a modern driveline hydraulic conversion? Fox 5.0 Mustang Tech 4
KZGUNS Fox Anyone using comp rollers? Pushrod length? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 3
Alley Oop Has anyone used the rotors from an LMR 5 lug conversion kit? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 9
K Fox anyone use this dual port oil extension from scott drake? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 5
killer5.0 Anyone make a bracket to mount the alternator below ps pump on drivers side (ps where ac used to be) 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 0
killer5.0 Anyone Here Use Ridetech Coilovers? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 3
killer5.0 Anyone Use This Harbor Freight Engine Support Bar? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 10
Steel1 Digital Tuning Anyone Use Fast Ez Efi Multiport Kit On A Fox? Fox 5.0 Mustang Tech 5
92Apocalypso Questions For Anyone Using New Edge Seats In Their Fox 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 6
G Anyone Used These Guys Before? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 11
T Foxbody Won't Start After 15-20 Minutes Of Being Used!! Fox 5.0 Mustang Tech 20
Mstng93SSP Anyone Use Turtle Wax Rubbing Compound To Clean Off Lucas Oil Octane Boost? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 6
Grn92LX Anyone Using A Stinger Pimp Ecu? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 5
J Anyone Use A Trunk Mat? 2015+ (S550) Mustang -General/Talk 7
Grn92LX Anyone Using The Holley Efi System? Fox 5.0 Mustang Tech 8
gnx547 Anyone Using The Richport Chinese Distributor? 1994 - 1995 Specific Tech 2
90sickfox Has Anyone Ever Seen Or Used A Dual Throttle Body Fox Intake ? Fox 5.0 Mustang Tech 7
udinkuknowme Wheels-Tires Anyone Using Aftermarket Steel Wheels? 1994 - 1995 Specific Tech 0
W 1966 Mustang Scarebird Conversion. Anyone Use This? 1965 - 1973 Classic Mustangs -General/Talk- 4
mikestang63 Curious If Anyone Has Used These Fox 5.0 Mustang Tech 8
LtDavis Fox Anyone Use A Csr Water Neck? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 30
90lxwhite Anyone Use J&m Rear Control Arms? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 20
90lxwhite SN95 Anyone Use The Tmi Seat Covers And Foam? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 5
Grn92LX Anyone Using The 4 Lug Rear Disk Conversion From North Racecars? Fox 5.0 Mustang Tech 2
mikestang63 Anyone Use This Tci Valve Body Fox 5.0 Mustang Tech 0
mikestang63 Anyone Used These Sr Springs From Am 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 0
S SN95 Does Anyone Use Stage 8 Locking Header Bolts? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 12
mikestang63 Anyone Use This Stuff Instead Of Prothane Super Grease Fox 5.0 Mustang Tech 1
betke76 Has Anyone Used Lost-car-registry? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 4
fords2live Has Anyone Ever Used Grade 5 Bolts As Head Bolts. Any Success? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 13
SlammedGT Anyone Use Ford Racing Short Throw Shifter And 2post Bracket 2010 - 2014 Specific Tech 13
B Anyone ever use blue collar performance spindles? Classic Mustang Specific Tech 0
boostfrk Anyone Using/used An E-fan From A Mercury Villager? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 10
ratio411 Anyone Ever Used A Cartech Gt40 Upper? Fox 5.0 Mustang Tech 13
D Anyone Who Has Used A Sct Tuner On Supercharger? 2005 - 2009 Specific Tech 2
RDS33 Projector Headlights-anyone Not Using Raxiom? 2010 - 2014 Specific Tech 3
J Anyone Used A Key Locking Auto Trans Shifter Knob? Classic Mustang Specific Tech 11
Similar threads