BBK Long Tube Headers, H-Pipe, Flowmasters and MORE NE Ohio

Discussion in 'Exhaust Parts' started by metal1399, May 22, 2010.

Thread Status:
Not open for further replies.
  1. NE Ohio
    BBK Long Tubes
    H Pipe

    Make offer. I also have for sale the following (contact information, location below)

    For sale: Thumper of Orange Park GT40 Heads, if you are viewing this listing you know what they are (if not go to Thumper of Orange Park). I am getting rid of a Mustang, with a ton of extra parts and for a full listing scroll down. Pictures upon request. These are NOT E7TE heads, but a very rare set of GT40 Thumper ported heads. This is the best package (springs, valve job, porting of both intake and exhaust passages) and the cost was over 1200 dollars for the labor on these heads. I am taking these to a local machine shop specializing in head work to go over and make sure they are 100% and I will provide receipts to the person who purchases these so if you have any issues, the work will be under warranty through them. Call or text (330) 361-9249 leave message if I don't answer. Also feel free to email at [email protected]. My name is Paul and I live in the Akron/Canton area. Make me a reasonable offer as I have $1500 in them.


    Other parts that I have available (I am sure that I am forgetting some...)

    Weld Drag Lites (8 Holes)
    2 15x10 w/tires
    2 15x4.5 w/tires
    King Cobra Clutch
    Ford Motorsports Clutch
    1 302 Small Block w/engine stand and all new gaskets, E7TE Headgaskets, main seals, etc.
    1 302 Small Block w/engine stand (will need work, car smoked with this block hence the above fresh block)
    BBK Long Tube Headers w/FEL PRO Gaskets
    Off road H Pipe
    Dumped Flowmasters
    Fiberglass Cowl Hood (White)
    Aluminum Driveshaft (May be sold, but have a stock driveshaft to go with instead)
    Ford Motorsports E-Cam
    On/In 1990 25th Anniversary LX White Hatch:
    Red 25th Anniversary Interior
    GT Front Seats (Red)
    LX Rear Seat (Red)
    Fiberglass White Cowl Hood (2 or 3 inch....not sure which)
    Fresh T5 5 Speed-no synchro issues shifts great
    Hurst Short Throw Shifter w/large Hurst White Shift Ball
    Moroso Drag Springs
    Maximum Motorsports Full Length Subframes welded in
    Tubular Control Arms
    4:10 Gears
    Full MSD 6AL Ignition With Coil
    Weiand Dual Plane Intake
    Holley 650 Double Pumper
    16 Gallon Fuel Cell with Holley Electric Pump
    Chrome Valve Covers
    Chrome Aircleaner/K&N Filter
    Multiple other Chrome Accent Pieces
    Underdrive Pulleys
    4 Cylinder Front Springs
    Body and car in overall good condition, no rust-One of the cleanest non-show car Fox Body undersides. No show car by any means and it has blemishes, but overall better shape than most of the Foxes that I see on the road.
    Hatch in great shape no rot
    Multiple Gauges
    No Radio
    Interior needs a little bit of attention but it is all there
    Clear Title-can be notarized any time you come (friend is an attorney)
    I AM SURE that I forgot some things

    *Car has everything (new gaskets, hoses, etc.) to finish. Really very close to being done (drop the motor in and hook it all up) but I have lost interest and don't have the time anymore to devote to working on this which is the reason for the sale. I want my garage back and my loss is your gain. I have an unbelievable amount of money and time into this. Again, my loss is your gain. Would like to sell it all to someone who would appreciate it and complete the car. If someone wants to jump on this before I start to sell all of the parts separately I will let it all go for $3,500 FIRM. I have well over twice that in the car, extra parts, heads, not including the countless hours spent. If you don't want the heads or other parts make me an offer for what you need/want and the price and we can talk. If you want pictures and are serious let me know. Email, text or call (330) 361-9249 or [email protected] Thanks, Paul
  2. how much for the long tubes shipped to 33619 and what coating and any pics?
  3. How much for the e-303 cam (pics)?
    how much for the bbk long tubes and h-pipe (pics)?

    i live in illinois... i would need them shipped to 60008 or maybe we can meet half way, id perfer not... but i may also be interested in the weldlites...

    but as of right now lets worry about the cam and exhaust... shoot me a price with shipping...

  4. how much for the dumped flow masters? I live in Parma.
  5. do u still ahve the bbk and price to ft bragg, nc 28307
  6. how much for the dumped flowmasters? i live in uniontown and can pick up tomorrow.
  7. sorry all sold...
  8. Uhmm is your price offer negotiable? And any photo on this? Im interested to see the interior and how the car really looks.. ;)
  9. still have the dumps?
Thread Status:
Not open for further replies.