Belt Keeps running off 1 groove on AC compressor

[1993SSP]

I had the front accessories off the other day, had some brackets and ect powdercoated, got it all back together and the belt keeps running off 1 groove on the AC compressor towards the back. It's got me puzzled and cannot figure out what the deal is

 

[LarsD]

Not to sound dense but I would assume it isn't lined up correctly. Maybe the compressor is tilted towards the rear a little bit.

 

[1993SSP]

Not dense at all, I had the same thing in mind today as I was driving home from work

 

[rd]

Had this for the first time with a serp belt a couple months ago on the 82.

I had failed to reinstall the belt correctly, and cut some of the v parts of the belt. When I found it, the damage was enough that even correctly installed, it kept jumping a groove.

New belt fixed it.

 

[1993SSP]

I rechecked all the mounting bolts, I did not torque the 2 front bolts under the compressor enough. I loosened em all, torqued down all the rear bolts, then the lower fronts and the main top, I havent had the car out yet but I feel safe to say the problem is most likely fixed.