My new set up on '93
Front 73mm
Rear caddy calipers/93 cobra rotors
93 MC-bench bleed
P/V
SS hoses all around
Bleed the rears in correct order and then moved to pass side front. It has been a constant parade of bubbles. We bleed the front caliper both with the mityvac tool and ol fashion 2 man way. Teflon on the bleeder screws. We have gone through a gallon (no joke) of fluid. Still have bubbles. Unless Im missing something we checked and rechecked all the fittings, all of them dry. Pedal goes to the floor during 2-man bleeding, doesnt really "pump up" pressure to hold. With car running it goes to the floor with no resistance. Help Im dumbfounded!
Front 73mm
Rear caddy calipers/93 cobra rotors
93 MC-bench bleed
P/V
SS hoses all around
Bleed the rears in correct order and then moved to pass side front. It has been a constant parade of bubbles. We bleed the front caliper both with the mityvac tool and ol fashion 2 man way. Teflon on the bleeder screws. We have gone through a gallon (no joke) of fluid. Still have bubbles. Unless Im missing something we checked and rechecked all the fittings, all of them dry. Pedal goes to the floor during 2-man bleeding, doesnt really "pump up" pressure to hold. With car running it goes to the floor with no resistance. Help Im dumbfounded!
