cammed 2v's what do they run?

[ninjastang125]

And you were the reason I went with cms over hitech.

 

[navarro98gt]

And you were the reason I went with cms over hitech.

What rpm are you shifting at?

 

[ninjastang125]

6300rpms on stock vavle spings

 

[Mustang92]

On the stock springs I wouldn't go too much higher than that. I had Crower stage 2 or 3 springs in mind, whichever ones had the titanium keepers. I was revving my car to 6800.

Bill

 

[ninjastang125]

Yea I know I am actually doing springs and stage 2 cams now since I have the motor apart again

 

[Mr. Rustypwnz]

Saw a guy with Hitech stage II's run a 12.1 w/ full bolt-ons stock suspension 4.10's and sticky tires.

that was that trevor dude, his car has some weight gone, but mine is light compared to his, mine has nothing in it really, and he has alot of suspension work, which mine does NOT have, so im working on that..

 

[ninjastang125]

That's who I was gtalking about not evan smith lol, trevor was a driver too

 

[Skidzz]

My best was 13.3 at 104 mph. I was running on pretty crappy tires though.

 

[2002tbstang]

my best so far was a few months ago at Sacramento Raceway, ran a 13.49/8 @107.9 with 1/2 tank of gas, sub and spare. It was last minute so I didn't get it lighter. car was 36XX lbs with me and all that stuff

 

[ninjastang125]

Holy crap 13.4 with a 107 trap. What was your 60ft 3.5?

 

[98COBRA281]

Holy crap 13.4 with a 107 trap. What was your 60ft 3.5?

one of my old passes was 13.3@108 with a 2.3 60'

 

[ninjastang125]

I just thank myself for switching to slicks, I will never go back to racing on radials.

 

[2002tbstang]

Holy crap 13.4 with a 107 trap. What was your 60ft 3.5?

for some reason I didn't a 60' time , Someone said only one lane was giving times but I didn't realize it that night. I wasn't launching too well thats for sure but I had stock rims with 245 nitto 555s and it I couldn't get it launch right, I'd spin too much or bog but the times were within .2 and within 1 mph for 3 runs. When I had gone to the track before I couldn't get below a 2.2xx 60', I still need more practice.

 

[SADL-UP]

12.5x @ 113 mph best ever with setup in sig...haven't come close since.

A more typical run is 12.9/13.0 @ 111/112

 

[ninjastang125]

I'm on my cell at work. What is done to your car and what was the 60ft?

 

[Ares]

Stock long block, Hitech stg2 cams, stock valve springs rev'd to 6400, exhuast, suspension, 4.30 gears and 10" slicks best [email protected], turned best mph of 113.52 and sixties at 1.59-1.60. Thats with a bad miss/hiccup after 1/8 which I have a good idea of a valve issue and will find out this weekend if my guess is right.

Swapping heads this weekend with set of stg2's from MHS with upgraded springs and titanium retainers.

 

[Poisoned Pony]

best I ran with my old setup was 13.3 and that was with VT Stage 1's, full exhaust, 4.10's and DR's. Street tires I was a 13.5-13.6

now I need to get my ass in gear and get a tune for the new combo

 

[saxmanJJ]

2004 GT 5-speed 3.73s Comp 262AH and some bolt-ons (265rwhp/299rwtq)

Welds (big and littles) with M/T ET Street radials
A/C delete, front sway bar delete, adjustable struts, MM XD LCAs, no spare/jack, passenger seat removed, battery in the trunk

12.90 at 104.64 (1.75 60') at Atco Raceway on 4/4/10 (high 60 degree day)

... still slow but getting there ...

 

[mineralgraygt]

02 gt with crower stage 2 blower cams full bolt on went 12.70 at 108.1 with a 1.78 60 foot with slicks and skinnies at atco. should go 50s i added some stuff suspension stuff so looking to go faster

 

[ninjastang125]

Mineralgray you have blower cams in a n/a car?