can someone give me an estimate on horsepower with these bolt ons...

[killer5.0]

i have a 93 gt...here is a list of mods that are on the car...these were already on the car when i bought them so if something looks like it would run better with something else in its place...feel free to let me know...

3:73 gears
BBK cai (fendermount)
BBK FP regulator
BBK headers
GT40 upper/lower
F303
70mm throttle body
70mm MAF
200a alternator (dont know if this matters or not)
H or X pipe with borlas that dump before axle (i cant remember which one and i cant look under my car b/c its too low..lol

i may be forgetting something but i think thats most of it.

 

[tannerc91gt]

235 wheel

If its a 5 speed, less for an auto.

 

[foxmustangman]

250 if you're lucky. Most of those mods don't do much in the short run.

 

[killer5.0]

what would that be at the flywheel? and also what should my next power mods be...thanks

 

[tannerc91gt]

You still haven't specified what type trans?

I'd say 270 crank on a good day. Keep in mind these cars put down like 190-200 wheel stock in 5 speed form

 

[foxmustangman]

Well most of those are parts to help the engine breathe easier. So I would get some new heads, then those other mods would actually come into play. Most likely a different intake as well.

 

[matador91]

I would also get a better cam if you get heads.

 

[Mustang5L5]

+1 on ditching the F cam

 

[bgoins]

Get some aluminum heads. F cams r good for turbos if ur thinking of going that route eventually

 

[Bullitt95]

what would that be at the flywheel?

I'd say you have about 280 flywheel HP or 240rwhp (manual tranny).

and also what should my next power mods be...thanks

Better heads.

 

[killer5.0]

what do good heads run? also 5 speed.

 

[tannerc91gt]

$12-1500 for a nice set of aluminum AFRs or TFS heads