Expired Cnc Hydraulic Clutch Kit Parts $100 Obo

Status
Not open for further replies.

66warhorse

New Member
Jul 11, 2005
6
0
2
I have the following parts to setup a hydraulic clutch. I used the same kit for a T5 conversion on my '66 and have loved it. I have a second set of these parts I had intended to use but no longer have that project.

CNC 711-3/4 master cylinder without resivour - $85 new
CNC 305-B push slave cylinder - $65 new
CNC 1312 adjustable rod - $18 new
Longacre 28050 Hydraulic Clutch Line 36" - $32 new (missing short hard line)

Asking $100 for all.

I used a T5 bracket I got from DazeCars which worked out great.
http://dazecars.com/dazed/test.html#4
He also has a pretty cool looking push-rod for the pedal to master cylinder. I made my own.

I used a T5 bell housing and a Centerforce dual-friction clutch and it works smooth with a medium pedal.

Email me if you have questions, [email protected]

inp9339gjigbc86fg.jpg

kpt6sfp00oehqrcfg.jpg
 

Attachments

  • Sponsors(?)


Status
Not open for further replies.