Dammit! Need new Master Cylinder. Will 2000 V6 Stang work?

[91LX_5L]

Im putting on my new cobra brakes and was bench bleeding my MC, when I pulled it I bent back the metal brake hoses a bit so I can get it out easier, when I went to put it back in it was hard to get the hoses to line up perfect with the inlets in my MC so I stripped the threads bad.

Anyways I need a new one. Will one out of a 00' V6 work?

Here is a pic:
View attachment 493391

It looks pretty similar except mabye the hose config is a bit diffrent where it goes to the brass colored metal block? Mabye not im not too shure???

THANKS A LOT IN ADVANCE!

-Matt

 

[bimmertech]

http://sn95brakes.cjb.net/

try that site, it might give you some info--i have no clue.

it might be a good idea to start the lines on the m/c then bolt it up to the booster.

 

[91LX_5L]

booster the gold colored metal block there?

 

[bimmertech]

naw, that is the proportioning valve. the booster is the bigazz black thing behind the m/c.

 

[91LX_5L]

nvrmind yea. thats what I tried. seems like I need a new MC from a 94/95 says the 00V6 is the same but the ports are the same size thread.