Does Anyone Have Experience With Anderson's Pms Iv?

Discussion in 'Fox 5.0 Mustang Tech' started by Tubes, Jul 21, 2012.

  1. I bought the PMS unit about 4 years ago and have should got around to installing. Looking for some advice.

    91 GT
    tremec 3550
    3.55 Fox Lake Trick Flows
    Southsides and eibach drag springs
    302 with vortech

    11.33 at 125 mph.
  2. I'm not sure what kind of help you are looking for but if it's help with tuning your car with the PMS the best place for help with tuning is they have a whole section dedicated to the Anderson PMS with everything from full base tunes to get you started to in depth tuning from guys that have been using the PMS forever. I personally think thats the best place for whatever system you are using.
  3. Thanks for the info. I kept going to their old site I bought the PMS awhile ago and just need to get a base tune for my combo. I have some dyno time scheduled next month so I'm getting pretty excited. I'm also hoping the PMS will help with some of my driveability issues. Thanks again for site.
  4. No problem glad to help. They should really take down the old site because your not the first person to think they were still not back online. The PMS should help with some of your issues, it is a good tuner but you have to remember it is a piggyback system it does not replace sensors like the fast system does. Also its important to set up your tps with the pms its the first thing Anderson wants you to do to get the pms in sync with your ecu
  5. There are some good base tunes over there at stangtuning for 302/vortech combos. I may have my old base tune laying around somewhere. If I can find it, I'll post it up.
  6. Thanks Scott. If you can find your tune that would be great.