Fox Drilling gt40 lower for egr coolant line and act

Blucifer99

Active Member
Jul 15, 2018
258
17
28
35
Port Mcnicoll Ontario
#1
Quick question. If im not using the rear egr coolant line thats on the back of the lower intake. Do i still need to drill it on my cobra lower? I kno i gotta drill the act sensor port. But if i dont have to drill the rear for the egr coolant line that would be awesome. One less hole lmfao
lower stock vs gt40.jpg
 
  • Sponsors (?)

Feb 18, 2001
30,030
6,532
224
Massachusetts
#2
No. It is for for the coolant line that normally goes to the egr. If you aren't running that, no need to drill it.
 
Feb 18, 2001
30,030
6,532
224
Massachusetts
#4
Never hurts to drill and plug. On my gt40 lower I had ported, I drilled out both. I put my stock temp sender in one
 

Blucifer99

Active Member
Jul 15, 2018
258
17
28
35
Port Mcnicoll Ontario
#5
Never hurts to drill and plug. On my gt40 lower I had ported, I drilled out both. I put my stock temp sender in one
The way i see it. If its
Not being used. No sense having it. One less hole to worry about. One less possible leak point.. And its already installed haha no turning back now its just to purdy to pull apart