Build Thread Enola-Black Fox - the 4r70 saga continues

Steel1

Mustang Master
Aug 18, 2017
1,407
681
143
51
Connecticut
Home remodeling definitely cuts into hobby time .
The wife and I just spent the last month worth of weekends putting engineered hardwood floors in our upstairs.
Four bedrooms and a hallway , about 800 sq. ft., looks awesome though !
Anyway.. the Mustang been sitting for that time and now winter has showed up in CT.
 
  • Sponsors(?)


StangNet created a new car social app called knowmoto! Add your Mustang or post a photo in the knowmoto app and enter for a chance at a $100 gift card from LMR. Click the LMR Logo for more about the knowmoto Mega Thread!

Mustang5L5

i'm familiar with penetration
Mod Dude
Feb 18, 2001
36,114
12,035
224
Massachusetts
Some more progress made, I have the cold side all the way up under the k member and I am ready to begin fabricating the merge pipe. I am considering different ways to mount the cold side under the kmember, the simplest solution to me is welding it to the washers for the steering rack. I may even weld some tabs to the cold side and do a skid plate.... we will see.
20201018_120314.jpg
20201018_120320.jpg


Methinks you don't have enough protrusion of your steering rack bolts through the nuts.
 

a91what

SendMeUrDataLog
Mod Dude
Apr 6, 2011
10,421
6,531
214
32
Hillsborough county
So whats the consensus on using the turbos as mufflers? I dont want the "racecar" sound around town. I know I cant do anything about the 3" downpipe off of each turbo since they are mounted in the bumper but what do you guys think about a baffled "muffler" between the cats and the turbos?

with just the cats and turbos will this be loud AF??

looking for opinions
 

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
19,872
6,677
193
polk county florida
You don't put mufflers between the engine and the turbos, I mean you could but the turbos and all those bends and turns will 'muffle' the exhaust noise. JMO.
 

CarMichael Angelo

my rearend will smell so minty fresh,
15 Year Member
Nov 29, 1999
10,319
8,754
234
63
Birmingham, al
m.imdb.com
Kinda difficult with the turbos where they are... but I suppose I will just play the waiting game and see how loud it is.
I mean....for WHATEVER reason you chose to put the turbos in California when you live in Florida...
And now you're worried about putting a catalytic converter, AND a muffler BEFORE the turbos....
I do some over the river and through the woods sht, but....
"This" sht don make no sense.
 

a91what

SendMeUrDataLog
Mod Dude
Apr 6, 2011
10,421
6,531
214
32
Hillsborough county
Well... my progress was dampened with 'honey do's ' last weekend but I have some time off over the Turkey day break.. I did get the fuel tank dropped and the new 340lph pump and hanger installed, the new hanger has -8 feed and -6 return built in to it so I started routing the nylon braided lines under the car. I went with Vibrant line as I found it on sale in 20' lengths.

I had to remove the turbos to get at the fuel tank so while I was in there I painted the turbo brackets ect. I also put all the fittings in place to make sure it all fit and clocked the passenger side turbo so the oil drain is not hanging down as low...

The items that are below the level of the bumper cover sortof concern me a bit, I dont think its a major issue but a large speed bump could wreck my day if it takes out the oil drain fitting.... so this brings me to my question of the day, rear skid plate/ diffuser..
the GT bumper already sits pretty low so I am not sure this would even serve a benefit beyond making me feel better about the one oil drain.

passenger side.. this is an older picture the fitting has been clocked 30* tward the bumper and is a short radius 90 so its significantly shorter.
1605801340615.png


this is the driver side, this one actually does not hang down that much maybe 1/2" past the bumper you cant see these standing next to the car and it sits higher that the fuel tank.
1605801431700.png
 
  • Like
Reactions: 3 users

KZGUNS

I can swing up to 11”
Jul 23, 2018
887
532
103
45
chardon, Ohio
I wonder if that drain adapter on the turbo can be made to accept a banjo type fitting that would tuck it up tight to the housing
 
  • Like
Reactions: 1 user

a91what

SendMeUrDataLog
Mod Dude
Apr 6, 2011
10,421
6,531
214
32
Hillsborough county
I am replumbing the fuel system, I decided to see what the regulator would look like mounted to the fuel rail.. if left in this location a bracket would help support it so the fitting did not.
Thoughts?
20201121_150248.jpg
20201121_150256.jpg
 
  • Like
Reactions: 1 user

WhiteCobra95

5 Year Member
May 2, 2006
348
46
49
That's too much free mass hanging on the other end of a fitting. It's going to vibrate and over time the fitting will loosen = fuel leak. It needs to be mounted to something in order to take the free mass out of the equation.