flexplate needed for a 1978 mustang ii (5L V8)

gregorh

New Member
Jun 7, 2020
5
0
1
20
canada
im in need of a flexplate ford a 78 mustang ii (141 ring gear) preferably sold in Canada, thanks in advance
 
  • Sponsors(?)


IICrew

Active Member
Mar 29, 2020
154
193
53
USA
Do you have a NAPA up there? Here is their part number. BK 6005058. Here is another part # from ATP Inc. # Z251. Be aware a lot of websites list them but most are wrong. No one makes them anymore to my knowledge.
 
  • Like
Reactions: Enzio and 2Blue2

gregorh

New Member
Jun 7, 2020
5
0
1
20
canada
Do you have a NAPA up there? Here is their part number. BK 6005058. Here is another part # from ATP Inc. # Z251. Be aware a lot of websites list them but most are wrong. No one makes them anymore to my knowledge.
yea we have a napa but they say that they don,t have a flexplate with that part number. As for ATP Inc the flexplate doesn't show up, thinking i'm going to bite the bullet and ship one over from the usa
 
Thread starter Similar threads Forum Replies Date
3 need flexplate: 1978 351W mated to 85 AOD, where? Fox 5.0 Mustang Tech 20
S What Is Needed To Use A Larger Bell Housing And A 157 Tooth Flexplate 1974 - 1978 Mustang II Talk & Tech 1
P New motor and converter do I need to replace my flexplate? Classic Mustang Specific Tech 2
jonfor need a new flexplate Classic Mustang Specific Tech 6
S need help with engine install: lining up torque converter with flexplate Fox 5.0 Mustang Tech 3
LXS Need help with my '66, flexplate hits starter plate Classic Mustang Specific Tech 2
jb1dsl Do I need a SFI balancer and flexplate for the street? Fox 5.0 Mustang Tech 10
T flexplate reinforcment ring hlep needed Fox 5.0 Mustang Tech 5
crushnut Flexplate issues, i need help! Classic Mustang Specific Tech 8
stephen4785 Do I need a different flexplate? Classic Mustang Specific Tech 5
gideup need help with flexplate-torque converter bolt removal Classic Mustang Specific Tech 8
G Question!! potential damage to flexplate/crank during 4R70W swap SN95 4.6L Mustang Tech 1
Nick Bos Starter gear doesn’t engage fully with flexplate 1965 - 1973 Classic Mustangs -General/Talk- 0
S New Engine, Flexplate, Torque Converter (flex plate noise). SN95 4.6L Mustang Tech 3
5.Overwhelmed Swapping flexplates on 302 with C4 1965 - 1973 Classic Mustangs -General/Talk- 2
MikeH686 Flexplate Bolts 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 0
D 1987 302 Flexplate 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 3
James Herbert 347 Flexplate/flywheel Help Classic Mustang Specific Tech 4
Fox_Gainz Starter Engagement/mesh Issue, Last Straw That Could Break The Camel's Back Fox 5.0 Mustang Tech 23
Mstng93SSP Fox Flexplate Question 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 3
Jeff Massey Flexplate Runout At Counterweight 1965 - 1973 Classic Mustangs -General/Talk- 4
fieldmob19 Engine 2001 Gt Mustang Flexplate SN95 4.6L Mustang Tech 1
S 1976 Mustang Ii Flexplate 1974 - 1978 Mustang II Talk & Tech 6
R Drivetrain Flexplate bolts work with a t5 flywheel? 1994 - 1995 Specific Tech 7
J Flexplate ? 1974 - 1978 Mustang II Talk & Tech 3
M Expired Fs: Tci Streetfighter Torque Converter (05-09) & Sfi Flexplate Package Drivetrain Parts 1
Brad Compton J W Performance N93003 - ''the Wheel'' Flexplate Drivetrain Parts 0
3ponyshow Flexplate Question Classic Mustang Specific Tech 8
09secondGT ford sfi flexplate Drivetrain Parts 0
R flywheel bolts shorter than flexplate bolts Fox 5.0 Mustang Tech 3
M flexplate difference Classic Mustang Specific Tech 7
S PA Supercomp C4 w/ TBrake, PTC Converter, SFI Bell & Flexplate, B&M Shifter in NW Fl Drivetrain Parts 6
8 starter grinding on flexplate Fox 5.0 Mustang Tech 2
B Newbie with starter/flexplate problem Classic Mustang Specific Tech 3
M Replacing Flexplate on 65? Without removing engine or tranny? Classic Mustang Specific Tech 9
N flexplate issues 1994 - 1995 Specific Tech 0
R Performance Automatic Flexplate 28oz 157 tooth Drivetrain Parts 1
A67StangMaster Flexplate installation Help Classic Mustang Specific Tech 1
shoguun Flywheel/flexplate bolt difference Fox 5.0 Mustang Tech 5
9 Intake manifold brass fittings, and flexplate issues SN95 4.6L Mustang Tech 2
J Flexplate Help! Fox 5.0 Mustang Tech 0
C Flywheels and flexplates 1974 - 1978 Mustang II Talk & Tech 15
R Torque conver - flexplate bolts, what grade? 1994 - 1995 Specific Tech 1
D flexplate & transmission questions Classic Mustang Specific Tech 1
89streetbeast c4 flexplate/ bellhousing Q's Fox 5.0 Mustang Tech 0
R Flywheel/Flexplate bolts Fox 5.0 Mustang Tech 5
sn-95matt5-0 balancer and flywheel/flexplate 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 1
coupe5.0 AOD swap questions-wiring and flexplate Classic Mustang Specific Tech 14
A Flexplate ? Classic Mustang Specific Tech 3
65fastbackresto Flexplate torque specs Classic Mustang Specific Tech 3
Similar threads