We used aircraft stipper, YUK! I found that it ran down the inside of panels through the trim holes and after drying and flaking off it rusted the panels from the inside so we started sanding the paint off.
Now that the da method has been mentioned, we took off the paint with a da down to the factory primer, this was a long time ago, would you suggest this unless there is damage or is there conflict with the new primers/paint
This was back in the lacquer days
Now that the da method has been mentioned, we took off the paint with a da down to the factory primer, this was a long time ago, would you suggest this unless there is damage or is there conflict with the new primers/paint
This was back in the lacquer days