Wasn't sure which sub-forum this belonged in, but curious if anyone has ever put fox seats in their sn95? As I've tried the search, both here and google, I can only find results the other way around where people put sn95 seats in a fox, but it still provided me with a lot of good info, like;
So, I stand a chance to buy a decent set of seats from a 1990 fox, cloth with manual tracks. Its Titanium vs Opal gray and won't match 100%, but that's not my main concern. I just want a bolt-in solution. And because most people are unhappy with height 'increase' with sn95's in a fox, I can only presume presume if I put fox seats in my 95, it will sit lower. Just curious if anyone has ever done this and what was your take on the setup?
- The track mounting locations on the floor are identical between fox & sn95 but may require rewiring if pwr tracks are used
- The common reason for putting sn95 seats in a fox is mostly cosmetic
- The common reason most are uneasy after doing this mod is the sn95 sits considerably higher
So, I stand a chance to buy a decent set of seats from a 1990 fox, cloth with manual tracks. Its Titanium vs Opal gray and won't match 100%, but that's not my main concern. I just want a bolt-in solution. And because most people are unhappy with height 'increase' with sn95's in a fox, I can only presume presume if I put fox seats in my 95, it will sit lower. Just curious if anyone has ever done this and what was your take on the setup?