Fried Microsquirt?

94tang

Member
Aug 24, 2003
286
4
19
46
East TN
Updated Megasquirt form 3.4.2 to 3.4.3. Long story short, i chose the wrong .ini file to begin with. Re-updated with the right ini file (Microsquirt cased), now the car wont fire. It cranks over just fine and i can hear the fuel pump priming. I installed the factory EEC-IV and the car fired with no problem.......any thoughts?
 
  • Sponsors(?)


a91what

SendMeUrDataLog
Mod Dude
Apr 6, 2011
9,676
5,854
204
31
Hillsborough county
When you do the firmware update through TS the file should show the recommended install for your hardware. You likely have the wrong one loaded now and had the correct one before.
Always choose the recommended firmware over your own selection unless you are certain.
 

94tang

Member
Aug 24, 2003
286
4
19
46
East TN
I looked over the tune after the first update and everything looked fine. The reason I thought something wasn't right was my fan came on and stayed on. Also my fuel pump kept cycling .
 

94tang

Member
Aug 24, 2003
286
4
19
46
East TN
there was a list to choose from for the update the first time. I didnt click on one and just kept going through steps...I think it MSextra II maybe the first time