got a different set, so need to sell these. They came off of my 302 based motor. Passenger side is notched for a YSI blower. The notching is done right and cost me $50. There is also a baffle welded into each cover properly with no warpage or thru welding marks.
So, you can buy those bare ebay ones for 57.00 but you'll need breathers and baffle plates if your a blown application, otherwise your engine bay will be oil-soaked!
They come with the Moroso air breathers which are about 40 bucks each. (one in each side)
No major dents, just some small scratches where the BOV rubbed up against them, but nothing major. Comes with all bolting hardware, but no gaskets.
$85 shipping included. Paypal only
PM is key
View attachment 234483
View attachment 234484
View attachment 234485
So, you can buy those bare ebay ones for 57.00 but you'll need breathers and baffle plates if your a blown application, otherwise your engine bay will be oil-soaked!
They come with the Moroso air breathers which are about 40 bucks each. (one in each side)
No major dents, just some small scratches where the BOV rubbed up against them, but nothing major. Comes with all bolting hardware, but no gaskets.
$85 shipping included. Paypal only
PM is key
View attachment 234483
View attachment 234484
View attachment 234485