For Sale GT-40 3 BAR HEADS

rockyracoon

10 Year Member
Nov 23, 2005
743
13
29
margate NJ
Gt-40 heads for sale. Seem to be in good shape but I would send out for a valve job.
pulled from a 97 mountaineer. selling due to the fact that in my locale (PHILA PA) still does a tailpipe and visual and so without thermactor inlets and passages, I don't think my car will pass state inspection.

$85.00 for both heads plus actual UPS shipping . below is links to pics.
Note two exhaust bolts broken off but plenty of room to get vise grips on them. A little heat and they will come right off. matter of fact im going to see if I can get them out. what you see is exactly what the heads looked like at the u-pull it. never tried to clean em up.

19194449.jpg

19194434.jpg

19194436.jpg

19194437.jpg

19194441.jpg

20190130_200938[1].jpg

This last pic shows the exhaust studs from a different perspective and how much meat there is to grab.
 
Last edited:
  • Sponsors(?)


rockyracoon

10 Year Member
Nov 23, 2005
743
13
29
margate NJ
if someone wants to pick them up I will lower the price to $65. just want them out of my garage. shipping cost would be high due to the weight.
I once shipped a trans from phila to Kentucky and it was around $135.00
 

LILCBRA

I started this morning by knocking out some studs
10 Year Member
Dec 6, 2005
1,861
923
154
48
Marietta, Ga
I may take you up on these, let me do some figuring and account rearranging and I'll let you know this weekend sometime - unless they're gone by then! Lmk!
Shipping to 30064 as an FYI.....
 

rockyracoon

10 Year Member
Nov 23, 2005
743
13
29
margate NJ
Ok lemme check on the shipping to your zip code. Should have answer by monday or tuesday. It will be UPS actual commercial price so it will be less than retail pricing. Quote will be from a family members commercial ups account. Im not looking to make money on the shipping. Just want them gone. I paid $125 from a u-pullit but thats the breaks.dont want to throw them out cause i gotta get something for them, even if I take a loss. Make sense ?
 
Last edited:

LILCBRA

I started this morning by knocking out some studs
10 Year Member
Dec 6, 2005
1,861
923
154
48
Marietta, Ga
Makes total sense. Let me know what you come up with and we'll go from there. It may be another couple of weeks before I have enough $ now though, had an unexpected expense come up Saturday afternoon.
 

LILCBRA

I started this morning by knocking out some studs
10 Year Member
Dec 6, 2005
1,861
923
154
48
Marietta, Ga
Any word on shipping charges? Payday is this coming Friday again.
 

LILCBRA

I started this morning by knocking out some studs
10 Year Member
Dec 6, 2005
1,861
923
154
48
Marietta, Ga
Any news on shipping charges? Payday is tomorrow. If I don't hear anything over the weekend, I have another project that I'm working on that takes precedence over the car so the money will disappear in fairly short order. Let me know what you come up with!
 

Buddy119

Member
Mar 22, 2019
7
1
13
36
Morgan, GA
If you've still got them, I'm interested in the heads. Any idea what the mileage was on the Mountaineer they came off? My ZIP is 39866, if you don't mind calculating shipping.
 

Buddy119

Member
Mar 22, 2019
7
1
13
36
Morgan, GA
If you've still got them, I'm interested in the heads. Any idea what the mileage was on the Mountaineer they came off? My ZIP is 39866, if you don't mind calculating shipping.
I bought a set a couple days after my original post. Good luck with the sale.
 
Thread starter Similar threads Forum Replies Date
Exile Average going price for stock GT40 (3 bar) heads? Fox 5.0 Mustang Tech 19
acinider Expired Vintage Air, T5 Into 66 Kit, 351c Heads, Gas Caps, Dist, Fuel Pump, Clutch Eq Bar, Pulleys, Carb Drivetrain Parts 5
hollywoodstang F3ZE-AA, 3 bar, 63cc, Clean GT40 bare heads for sale Engine and Power Adder 1
old_blue gt-40p heads with 4 bars??? Fox 5.0 Mustang Tech 6
DudeStang For Sale FS: Steeda Sway Bars & Shelby Shock Tower Brace Suspension Parts 0
S For Sale Eibach Sway Bars 2005-2010 Suspension Parts 0
R Z-bar clutch pedal without underdash spring? Classic Mustang Specific Tech 1
9 SN95 Intake Manifold and Drag Bars general questions 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 3
F For Sale New Lakewood Traction Bars, Universal Suspension 0
Scott7512 Kenne bell Panhard bar 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 6
droopie85gt SOLD Lunati Hydraulic Link bar Lifters, Engine and Power Adder 1
G Suspension Rear sway bar hitting exhaust Fox 5.0 Mustang Tech 17
K Fox MM strut bar 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 8
9 Traction bar removal 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 8
0 Which is the Correct Sway Bar Replacement for 97 Cobra Coupe SVT Tech Forum 1
J Broken Sway Bar Mount Bolt 1996 - 2004 SN95 Mustang -General/Talk- 0
G Suspension No sway bars? Sloppy handling Fox 5.0 Mustang Tech 8
J A/M rear sway bar popping noise 1996 - 2004 SN95 Mustang -General/Talk- 2
C SN95 stock sway bars adjustable?? 1996 - 2004 SN95 Mustang -General/Talk- 1
a91what Team Z uppers and lowers with MM panhard bar VS Panhard and torque arm 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 14
G Styling bar 1996 - 2004 SN95 Mustang -General/Talk- 0
X 2012 Mustang GT/CS 19x10 square setup question about sway bar link bolts 2010 - 2014 Specific Tech 3
Chieftain 1990 Mustang convertible power door window guide bar bushings. Bottom is replaceable, what about top Bakelite type? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 8
A Sway Bar Links 6" or 7" 1965 - 1973 Classic Mustangs -General/Talk- 0
J Sway bar/sway bar end links 1996 - 2004 SN95 Mustang -General/Talk- 2
Y New Anti-roll Bar 15% Off CJpone 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 0
O 66 convertible rear sway bar question Classic Mustang Specific Tech 2
I Engine Metal Bar Back of Lower Intake? Fox 5.0 Mustang Tech 4
Tim Watts Expired Wanted - 1994 Tri-Bar Alloy Wheels in UK Wheels Tires Brakes 2
Mustang5L5 SOLD 25MM Solid Cobra rear sway bar Other Classifieds 1
acpowell Factory sway bars vs after market 1994 - 1995 Specific Tech 10
T B&M differential cover issues 1996 - 2004 SN95 Mustang -General/Talk- 1
C 65 Mustang hi-po z bar 1965 - 1973 Classic Mustangs -General/Talk- 13
Clapper Suspension 2007 V6 Convertible Sway Bar Bushing - Can't seem to find the correct size? 2005 - 2009 Specific Tech 0
wusthof Upgrade sway bar during spring install? 2005 - 2014 S-197 Mustang -General/Talk- 3
killer5.0 Corbeau harness bar...schroth dot 4 point harness and racing seats on street car...safe? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 9
Reddevil91 Eibach rear sway bar issue?!! 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 4
killer5.0 Anyone Have 3" Tailpipes While Running A Panhard Bar And Torque Arm? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 7
S Rear Sway Bar / Ride Height Imbalance 2012... 2010 - 2014 Specific Tech 1
1989LXFOX Gt40 (3 Bar) And Gt40 Intake Install Cost? Fox 5.0 Mustang Tech 36
killer5.0 Anyone Use This Harbor Freight Engine Support Bar? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 10
K Harness Bar Recommendations 2015+ (S550) Mustang -General/Talk 0
reddragonracing For Sale 94-98 Front Sway Bar Suspension Parts 1
Gear grabber Rear Sway Bar ? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 8
95BlueStallion SOLD 87-93 Gt Fog Light Bar With Like New Fog Lights Interior Exterior Parts 1
P Rear Sway Bar 2005 - 2009 Specific Tech 1
utemachine Cai Hitting Strut Bar 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 10
robertdeuce Installing Light Bar In An 89? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 5
90lxwhite Rear Sway Bar Nuts N Bolts. 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 13
jackson0215 67 Big Block Clutch Z Bar Classic Mustang Specific Tech 1
Similar threads