**HELP** High Beams and Radio

[claytucc3]

I had to jump start my car after leaving it sitting for a bit. When I did, my high beams and my stereo no longer worked. I checked all of the fuses under the dash and they all seem okay. Any suggestions?

 

[HISSIN50]

Only high beams don't function? Lows and other lighting is ok? Does flash to pass function properly (both low and highs on at the same time)?

 

[claytucc3]

Yes low beams work fine, the flash to pass does not work.....I know its a weird one huh? All other lights and electronics work except for my radio.

 

[Repostyle]

Well just don't drive it at night and radio's are distracting. j/k

The two aren't related in the fuse panel (which my first thought is to double check them all). Other than that I'm drawing a blank on why they wouldn't work after a jump.

 

[HISSIN50]

FTP doesn't function at all, or only the low beams illuminate during FTP?

 

[claytucc3]

When I pull the switch towards me to activate the high beams all lights turn off

 

[claytucc3]

Okay, I pulled the stereo. The fuse was blown on the back of the unit. Now, what should I check for the headlights?

 

[HISSIN50]

I'd check the in/out voltage for the high beams at the multi-function switch.

 

[claytucc3]

Is there a separate relay for the high beams?

 

[HISSIN50]

Is there a separate relay for the high beams?

There are no relays in the headlight circuit at all. The MF switch is what switches lows and highs, and activates PTF.