Would installing a cobra ECM be just the same as doing any other mass air conversion or are there other pin outs or other things that would need to be done?
That is correct, the Cobra ECU requires 24lb injectors & MAF, but is otherwise the same. That is assuming your car is a 5spd. If yours is an AOD, the power signal wire in the AOD harness will fry that 5spd computer in a heartbeat.
how so? you can run manual A9* computers in AOD cars?
Thanks guys and yes I do have the 76mm mass air housing and 24# injectors
What about a hessitation what does it do? Are you saying this may not of been such a good idea I had read on here that a cobra ecm was the thing to have???
Are you saying this may not of been such a good idea I had read on here that a cobra ecm was the thing to have???