OK so I spent this past weekend doing some much needed work on the stang and I'm more or less done tooling around with the drivetrain for a while. However, I am finally going to install the 5 lug swap & cobra brakes that I've been planning on doing for the past year and a half and I figure its a good time to also tackle the suspension a bit. My car does/will see some drag strip time, but is primarily street driven (not daily). I'm not really concerned with weight transfer but I also don't want an all out road race set up. I'm looking for a decent handling set up for the street that will still hook ok. I currently have a stock V8 suspension minus the quad shocks and some lakewood LCA's. I also don't want to lower the car too much.. maybe 3/4 of an inch or so. I was thinking about maybe some bullit springs, MM panhard bar, keeping the lakewood LCA's, and adding some strut tower braces. I'm not sure which shocks/struts I'll get, and if a coil over set up it worthwhile. I hear lots of mixed things about the coil overs and how they put a lot of stress on the strut towers. Anyway, I'm no where near a suspension expert and was hoping someone can help. I'm not in a rush, but want to start piecing things together soon. Thanks..