! Help On COBRA R WING filling old holes

Discussion in 'SN95 V6 Mustang Tech' started by 02ponypackage, Mar 24, 2006.

  1. I was wondering if ne1 knew the exact gromets or plugs to use to fill factory spoiler holes when I put on my new Cobra R wing...if any1 has a code for a part availble at home depot or sumtin that would be great or pictures or something that'll help me...thanks for your time guys
  2. dont know the exact size but you'll have to paint them w/ some touch up paint. I think they might be 1/4" but dont hold me to that.
  3. You could also buy a wingless decklid from a totaled car for cheap, and drill into that one. Plus if you don't like it, or when it gets torn off by vandals who think it is rice, you will still have your stock decklid. :nice:


  4. Here are the part numbers you need.

    Plug the holes with Dorman's retainer plugs #45812 (3/8") and #45490 (1/4") and VersaChem flowable clear silicone.

  5. i forgot to mention its a 2002 if that makes ne difference since I only see one screw on each side when trunk is open so i wouldnt need 2 diff sizes
  6. are those the part numbers you get from ford for those plugs?