help with a headliner????

[itsaMustangtoo]

Got a new headliner for the cobra. Started installing it ,but I need help. What holds the headliner at the back towards the hatch,in the center??? I used 3m spray adhesive and tucked it into the hatch weatherstrip, but it did not hold. Am I missing something? (trim)

 

[THE COBRAMAN]

Just glued in. I wound up using a regular contact cement, since the aerosol didn't hold on mine, either.

 

[itsaMustangtoo]

like a vinyl floor adhesive?

 

[THE COBRAMAN]

I think I used Weldwood general purpose contact cement, like is commonly used for formica countertops, etc.

 

[jeffnoel]

Use 3M weatherstripping adhesive.

 

[cobraii351]

Contact cement! Apply to both sides. Allow time for both side to tack up and place it, CAREFULLY As it will be permanent.

Tim

 

[itsaMustangtoo]

Thanks, I thought I was missing a moulding to hold, it or some clips. It has been a while since I removed it.

 

[itsaMustangtoo]

Holy cow I just got finished with the headliner. You need to be an octopuss to in stall one . Hope I never have to do that again, but certainly, it would have been easier with the seats out. Oh well. Now I am looking for the pillar covers. 2 in front beside the windshield and the 2 beside the seats between the door windows and quarter windows. anyone have some?

 

[Turbo II]

What color do you need?

 

[itsaMustangtoo]

Any- but I if I can get them -----BLACK

 

[itsaMustangtoo]

What color do you need?

Hello? Anyone out there??