Help with tuning...

90GTFOX22

Member
Mar 7, 2017
44
0
6
35
Im trying to tune my car by myself, im in montana and unfortunately professional tuning is pretty limited here. The car runs pretty good when not in boost. Seems like it just falls on its face when i hit boost. Pretty sure i need to add alot of fuel. Would love for one of you guys to check out my tables and tune!

306 TF170's, x Cam, Edlebrock upper and lower, 10.1 compression, 60lb dekas, 76/65 on3 kit
 

Attachments

  • CurrentTune.msq
    273.2 KB · Views: 30
  • last data log after leak on vac.mlg
    2 MB · Views: 21
Last edited:
  • Sponsors(?)


90GTFOX22

Member
Mar 7, 2017
44
0
6
35
heres a cold start log as well. I was having problems with my Coolant temp sensor for a couple mins, but got it working
 

Attachments

  • coldstart.mlg
    1.8 MB · Views: 24

90GTFOX22

Member
Mar 7, 2017
44
0
6
35
I had alittle time to mess with it today. Here is a updated Map and DL. Any help would be greatly appreciated
 

Attachments

  • Current Tune.msq
    273.3 KB · Views: 28
  • kami.mlg
    261.7 KB · Views: 23

a91what

SendMeUrDataLog
Mod Dude
Apr 6, 2011
9,960
6,128
204
31
Hillsborough county
Your AFR table is not scaled correctly, there is a row for 90kpa above 60 and below 70.

The rest looks fine to begin with, except for the timing table, its aggressive below 2000 rpm. but if you have not noticed any detonation then it may not be an issue.
 

90GTFOX22

Member
Mar 7, 2017
44
0
6
35
I just rescaled my afr table yesterday, seems like something I would miss. . I have been having a bucking issue under 2000rpm. So pull some timing?