Fox Horsepower Guess?

[Xkuzme1]

I’d like to hear what your best guess of my horsepower and torque are. I’m guessing
Max 300 HP @ 6300
310 TQ @ 3200
My guess is purely based on seat of the pants.

• Edelbrock victor jr heads
• Cobra intake
• 93 cobra MAF/TB/Fuel Injectors
• Fly cut pistons
• Compcams 1.7 roller rockers
• Compcams 1pc hardened pushrods
• 130 amp alternator
• King cobra clutch
• X-303 cam
• MSD distributor
• Stock headers w/straight pipes (no smog)
• Balanced
• 3:73 gears
• T5 tranny
• Only pullies are water pump/alternator

 

[CarMichael Angelo]

I’d like to hear what your best guess of my horsepower and torque are. I’m guessing
Max 300 HP @ 6300
310 TQ @ 3200
My guess is purely based on seat of the pants.

• Edelbrock victor jr heads
• Cobra intake
• 93 cobra MAF/TB/Fuel Injectors
• Fly cut pistons
• Compcams 1.7 roller rockers
• Compcams 1pc hardened pushrods
• 130 amp alternator
• King cobra clutch
• X-303 cam
• MSD distributor
• Stock headers w/straight pipes (no smog)
• Balanced
• 3:73 gears
• T5 tranny
• Only pullies are water pump/alternator

The balancing alone should make it 397 hp/413 tq.

 

[Xkuzme1]

0-60 in 4.54 seconds and 249 feet.

 

[MustangIIMatt]

 

[Potomus Pete]

What do you think? That car should be getting out of control if your not paying attention. It reads like it has everything I ever wanted.

 

[revhead347]

I would say your numbers are in the ballpark. The intake is the most restrictive part I would say. If you want to squeeze a little more out of it, Tmoss does a great port job on those.

Kurt

 

[2Blue2]

The intake is the most restrictive part I would say.

Stock headers w/straight pipes (no smog)

Wouldn't this be the most restrictive part?
Would stock headers be able to support much more than 300hp?
IDK just asking

 

[General karthief]

Wouldn't this be the most restrictive part?
Would stock headers be able to support much more than 300hp?
IDK just asking

Barely

 

[revhead347]

Wouldn't this be the most restrictive part?
Would stock headers be able to support much more than 300hp?
IDK just asking

I stand corrected. That is absolutely the most restrictive part.

Kurt