Im installing a Typhoon intake and found that it did not come with a lower intake oil baffle for the PCV valve nor did it have a provision for one to be installed. Interested in seeing what others have done about this as I did not find a concrete solution through a search. I still have the stock lower with the baffle installed, could I drill that off the stock manifold and maybe drill and tap some holes on the Typhoon lower intake to install the baffle? Any help is appreciated.
Intake Oil Baffle
- Thread starter 88t-topGT
- Start date
-
Sponsors (?)
Interesting that it didn't have the baffle... Mine did have it, but it didn't come with the PCV screen. Luckily, my stock screen was pretty clean, so I hit it with some brake cleaner and dropped it into place. I don't see any reason you couldn't snag the one of your stocker and transfer it over, but make sure you use some thread locker on the screws/bolts, so you don't lose them into your lifter valley.
stang22
Active Member
I took mine off of my stock intake and it worked fine. I have heard mixed reports that some intakes have them and some don't. Mine didn't have one either.
Tim
Tim
Similar threads
