Is this cam right for my combo?

Discussion in 'Fox 5.0 Mustang Tech' started by BillaMustang, Dec 18, 2003.

  1. 282 advertised intake,[email protected] .555lift
    285 advertised exhaust,[email protected] .568lift, 110 Ls. It's also a solid flat tappet

    combo is 331,10.4comp,AFR185's,VictorJr,750DP,Bassani LT's,Tremec3550,4.10 gear.

    3030# race weight.
     
  2. I think the lift sounds low, maybe use 1.7's to bump it up a bit, Also I would go with a 108 or 106lsa. My combo is simular, 331, 11:1 comp., slightly ported Twisted wedge heads, tunnel ram, dual quiads :D , 1 7/8 long tubes, 5-speed with 4.56 gears. I had my solid flat tappet cam custom spec'd with 280/284 advertised, 250/[email protected], .592/.608 lift, 106lsa.

    Hope this helps,

    Matt