Well i just got a set of 02 leather seats. I want all the power options to work and i know that i have to do some re-wireing. Anyone have a writeup or guide on how to do it? Or u can just tell me in this thread
Just got some leather 02 seats..how to wire them in?
- Thread starter WhiteDevil
- Start date
-
Sponsors (?)
Bosko5.0
Active Member
'66 coupe
Founding Member
Did your stock drivers seat have power?
I used the '95 power rack on the '99+ drivers seat. Takes a little modification, but it will work. Passenger seats aren't power, and will bolt right in.
My stock passenger seat had lumbar, but the new one doesn't. I guess it wasn't standard on the newer GT's.
I used the '95 power rack on the '99+ drivers seat. Takes a little modification, but it will work. Passenger seats aren't power, and will bolt right in.
My stock passenger seat had lumbar, but the new one doesn't. I guess it wasn't standard on the newer GT's.
YEah im mainly talking about the drivers seat. It has the 6way power. My stock track died last year so right now i have a manual track in it. I want to use the 99+ 6way power.
Bosko5.0
Active Member
this is the wiring you need to make from the old harness. 
http://www.corral.net/forums/showthread.php?t=828820&highlight=seat+track
http://www.corral.net/forums/showthread.php?t=828820&highlight=seat+track
this is the wiring you need to make from the old harness.
http://www.corral.net/forums/showthread.php?t=828820&highlight=seat+track
Thanks for that. Just to clarify all the connectors that i see there will need to be cut from my stock seats? Or are they from the new seat?
Anyone else do this?
Bosko5.0
Active Member
I did it a while back but I can swear they are all from the stock seat. that thread I posted shows the way I wired it up, I just used the proper connectors.
