Progress Thread Left me stranded, again... just luckily it was in the driveway.

Reddevil91

10 Year Member
Mar 3, 2010
1,315
516
153
I believe I could use this setup but how does one go about hooking this up??? Just the piece from amazon, the other wheel was just for reference even though I’m sure all you guys know what that piece is, ha ha. Has the wiring from the back of the buttons ready to go Im just not sure how I’d wire this to make the horns work. Thanks!
251D2A47-3DC1-4C61-9483-A6A07BCA6B98.png
97E27D85-077E-4692-A3CF-B4B8FBEF349B.png
 
  • Sponsors(?)


2000xp8

SN Certified Technician
Aug 8, 2003
6,825
999
194
NJ
Just buy a tilt column and do the swap right.
Looks like you been spending a lot of time fixing and cleaning things up (doing a nice job from I can tell), be a shame a this point to rig up a horn.
I think the bottom line is you need the adapter contact so the wires don't get wrapped up around the wheel.

One day some old lady may come into your lane and you really do need the horn quickly.

Besides that setup looks like it's right out of the original fast and furious.
 

CarMichael Angelo

clearly, I’ve got something going on in that hole
SN Certified Technician
Nov 29, 1999
12,474
13,598
234
62
Birmingham, al
m.imdb.com
Just buy a tilt column and do the swap right.
Looks like you been spending a lot of time fixing and cleaning things up (doing a nice job from I can tell), be a shame a this point to rig up a horn.
I think the bottom line is you need the adapter contact so the wires don't get wrapped up around the wheel.

One day some old lady may come into your lane and you really do need the horn quickly.

Besides that setup looks like it's right out of the original fast and furious.
If some old lady came into the lane, I doubt a fully functioning horn with the button in the factory location will matter one little bit.
 

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
16,262
5,184
193
polk county florida
If some old lady came into the lane, I doubt a fully functioning horn with the button in the factory location will matter one little bit.
I agree, I have not had a working horn in my car since I bought it.
I do believe that if some geriatric moved over into your space and you do sound the horn they will likely react by slamming on the brakes and we know what can happen then.
Also if a dog or other animal (not a cat, they will dart out in front of you just to eff you up) when you sound the horn they will stop and look at you.
I'm not say'n you should not fix it.
 

Reddevil91

10 Year Member
Mar 3, 2010
1,315
516
153
Ok so I opted against the fast and furious nitrous express button thingy. So picked this kit up at autozone. I’m just trying to rig something so I can honk for inspection. I’m not sure if I’m suppose to buy a whole new relay or use the existing horn relay to which I have no idea where it is. I know this is probably super easy for a lot of you but wiring is not my expertise and just suck at it. Found the horns, and what I think might be the relay but not sure. My car is a 91 so if you can help me out I’ll take it. If there is an easier way I’ll listen to that to thanks guys.
E8FD2393-9A97-417F-A114-00FE459817DF.jpeg
E7C05019-694D-4FE5-9ACA-D7026D1C0614.jpeg
5296D91B-416A-4E36-8AD3-F58E68069E48.jpeg
1A1D7231-17ED-4942-B517-1964BBE01EB7.jpeg
B21751AC-0201-47C3-91FF-FEEB460F5822.jpeg
 

Mustang5L5

i'm familiar with penetration
Mod Dude
Feb 18, 2001
32,827
8,971
224
Massachusetts
I don't think you need the relay here. You aren't running a high current horn. You just need to ID the two horn wires on the colume, tap into them and install a button to connect them.

I'm at work now (not that I would really call it work the Friday after Xmas) but my 91 wiring diagram manual is home. I can get you two colors to tap into in the colume. Just tap into those, run your wires to your button and you should be good to go.
 

Reddevil91

10 Year Member
Mar 3, 2010
1,315
516
153
I don't think you need the relay here. You aren't running a high current horn. You just need to ID the two horn wires on the colume, tap into them and install a button to connect them.

I'm at work now (not that I would really call it work the Friday after Xmas) but my 91 wiring diagram manual is home. I can get you two colors to tap into in the colume. Just tap into those, run your wires to your button and you should be good to go.
Cool that would be appreciated thanks
 

Blown88GT

Founding Member
Nov 13, 1999
1,960
445
124
Palm Beach Gardens, FL
I don't think you need the relay here. You aren't running a high current horn. You just need to ID the two horn wires on the colume, tap into them and install a button to connect them.

I'm at work now (not that I would really call it work the Friday after Xmas) but my 91 wiring diagram manual is home. I can get you two colors to tap into in the colume. Just tap into those, run your wires to your button and you should be good to go.
It's a high current air horn. The factory uses a relay, don't need a 2nd one. I have the same horn from HF.
EVTM_p081.jpg
 

Mustang5L5

i'm familiar with penetration
Mod Dude
Feb 18, 2001
32,827
8,971
224
Massachusetts
Here’s the 91 specific diagram. Wire color changed.

DF915DDB-CDBF-4C14-BB9C-7AAE03842A70.jpeg


Grounding the yellow w/green strip wire should trigger the horn relay
 

Reddevil91

10 Year Member
Mar 3, 2010
1,315
516
153
Here’s the 91 specific diagram. Wire color changed.

DF915DDB-CDBF-4C14-BB9C-7AAE03842A70.jpeg


Grounding the yellow w/green strip wire should trigger the horn relay
No air horns just the stock horns, but figured this kit I bought would still work wouldn’t it?
 

Reddevil91

10 Year Member
Mar 3, 2010
1,315
516
153
Well so this horn deal never actually happened this far. I ended up having friend get me the hook up and got the pass for the safety inspection. By the time I did this, got the wipers and motor back on, fixed the fuse to my blinkers it was easier just to throw the guy a 20 and pay the 7 bucks for the inspection. So now to my real issue which I’ve yet to figure out. So car cranks, runs fine. I’ll drive it out somewhere runs great, highway no problems. When I get off the highway and roll up to a light and have to sit there waiting is when it can start to get sketchy. It will idle fine then fluctuate a little then just shut off. Cranks back on and off I go trying not to get caught at another light. It has the original IAC and tps sensor. So last night tested the tps since it was set during my tune. With key forward it read 0.98 and warmed up running read 1.05, I have a new IAC and tps sensor that I bought awhile back but never put on. I had this issue after the top end was finished and got it back from the dyno tune. 1st the TFI module went bad, slapped a new one on and it cranked. Not long after that it kept wanting to idle out while just sitting, to which it was summed up to be the pick up coil so I picked an autozone piece, got it in and timing adjusted to what it was before and we are off. This issue seems to be once the car has been driven and warmed up a bit. I can cruise it for awhile, runs great on long straight open roads and like I said earlier I’ll get off the highway etc get to a light, throw it in neutral and it will kinda idle surge and drop out and turn off. This keeps me from wanting to drive the car more bc I don’t want to get stuck in traffic. Any ideas? Those tps reading seem normal don’t they?
 

KRUISR

Active Member
Apr 16, 2015
178
49
38
49
reddevil91 has 94/95 spindles

90sickfox has 96-04 spindles pictured

I have 96-04 spindles on my '90 GT
 
Thread starter Similar threads Forum Replies Date
LarsD Lx Left Me Stranded Again Fox 5.0 Mustang Tech 44
O Engine 89 Lx Died And Left Me Stranded Today Fox 5.0 Mustang Tech 8
U2SLO450 my car left me stranded Fox 5.0 Mustang Tech 5
Adam95GT Car Left Me Stranded... UGH! HELP!!! 1994 - 1995 Specific Tech 98
PoopDawg Car left me stranded for the first time ever today... 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 5
C my mechanic Swapped a 99 5.0 explorer 302 into my 94 5.0 left a much of stuff disconnected and abandoned it HELP!!! 1994 - 1995 Specific Tech 15
G Odd shaking on left upper side 1996 - 2004 SN95 Mustang -General/Talk- 4
M My Dad left me a yellow 67 rust bucket :) The Welcome Wagon 1
2 Brakes Right front and left rear brakes locked up. Classic Mustang Specific Tech 6
M Why is my left turn-signal light always lit?!! Fox 5.0 Mustang Tech 8
M Does anyone know what the hole to the left of the oil pressure sender is for?? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 6
Dustin2v Electrical 2001 GT - Left Sequential Taillight not working SN95 4.6L Mustang Tech 1
S Left blinker stays on with running lights. SN95 4.6L Mustang Tech 11
B 2004 Squeaking and Squealing when I turn wheel left or right The Welcome Wagon 1
B Sticker inside left door jamb SN95 4.6L Mustang Tech 1
R Noise coming from rear left wheel. Getting mixed information from facebook 1996 - 2004 SN95 Mustang -General/Talk- 1
67coupe Progress Thread 67coupe’s 89 LX - One paint session left!!! 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 301
C 1966 left front brake locks up when I radio the brakes Classic Mustang Specific Tech 3
The Shemdogg No left turn power steering 1965 - 1973 Classic Mustangs -General/Talk- 4
B sticking left front brake 1996 - 2004 SN95 Mustang -General/Talk- 9
true01blueGT 2003 mustang gt only left driver tweeter 1996 - 2004 SN95 Mustang -General/Talk- 1
F Humming In The Front Left Of Car 2005 - 2014 Specific V6 Tech 0
G Expired 1970 Mustang Front Left Clip $250 Interior Exterior Parts 0
J Wheel/tire Shakes Bad When Turning Left At Hwy Speed Please Help! 2005 - 2014 S-197 Mustang -General/Talk- 5
Slo5Oh89 Front Left Sagging Fox 5.0 Mustang Tech 6
TheFleshRocket Help! Attempting To Troubleshoot Mach 460 Front Left Tweeter Not Working. Mustang Sound & Shine All 1
9 Aunt Passed And Left Me Her Mustang... What To Do 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 47
teebluestang Fuel Gauge, Speed O, And Left Turn Signal Fox 5.0 Mustang Tech 1
dr. Dan W. Greetings From Way Out In Left Field! The Welcome Wagon 4
MCF84 Expired 2015/2016 Mustang Left Side Hood Vent Interior Exterior Parts 1
Jordan Warta 1995 5.0 Making Creaking Noise With Hard Left Turns? 1994 - 1995 Specific Tech 0
Joshuaachury Brakes Pulling Left When Braking And Random Scrapping Noise When Turning! SN95 V6 Mustang Tech 1
stykthyn Left Bank Exhaust Cold Fox 5.0 Mustang Tech 5
J Dont Know If I Have Enough Hair Left To Pull Out. Need Help With My 95 5.0 5 Speed Gt 1994 - 1995 Specific Tech 5
J Newbie Here. Dont Know If I Have Enough Hair Left To Pull Out. Need Help With My 95 Gt The Welcome Wagon 0
mpcv2000 Electrical Doing A "wire Tuck" On A 93 Lx. Left Frame Rail Side Harness Blk/wht 2 Into 1 Goes Where ? Fox 5.0 Mustang Tech 5
skiwesser11 Dumb Q: Would I Know If Pilot Bearing Was Left Out? Fox 5.0 Mustang Tech 8
C Expired 94-98 Left Rear Brake Caliper - A1 Cardone - Never Installed Wheels Tires Brakes 0
HexMora Rear Right Tire Sticks Out More Than Rear Left Tire. Fox 5.0 Mustang Tech 5
7 88 Gt No Brake Lights/ No Left Rear Turn Signal 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 3
M How Do I Be Left Alone In My 73 Mustang? 1965 - 1973 Classic Mustangs -General/Talk- 19
65Rob Left And Right Control Arms? Classic Mustang Specific Tech 2
M Mach 460 Left Side Not Working 1996 - 2004 SN95 Mustang -General/Talk- 5
Toolmaan 88 Mustang Rust On Frame Rail Below Left Shock Tower Fox 5.0 Mustang Tech 2
Busamike 1965 Fastback 347 Stroker, Whit Smoke Out Of Left Exhaust? Classic Mustang Specific Tech 3
B Help Build A 302 For A Sand Rail Using Left Over Parts... 1965 - 1973 Classic Mustangs -General/Talk- 6
GoldenEagle91 Suspension Clunk When Turning Left Fox 5.0 Mustang Tech 8
MRaburn 2015 Ford Mustang Convertible Enters Stage Left StangNet Site News 0
90lxwhite Any E7 Guys Left Out There? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 37
J Expired 89 Gt Left Door Complete Power No Rust Interior Exterior Parts 0
Similar threads