I think the newer models have a flatter sill area, and having it face out makes sense. With ours at such an angle, it's just a little off looking to me.
Car looks awesome... is it ready to go for a drive yet?
Also, can you recap what all you did to it over the last couple years when it was torn down? I know rust fix, SFC install, engine upgrades... but it's been a while.
Hurry up…… I want to hear this thing start and run down the road……. And a full report on the Bassani XPipe. LolFired up the car today to test the AC compressor. I put a small shot of N2 into the a. Back in jan/feb. Glass to see when I checked pressure it didn’t lose any at all.
However it wasn’t enoigh pressure to activate the compressor, so I bumped it to 50 psi and that did the trick.
Compressor cycle was so quiet that all you hear is the click of the clutch and that’s it. No other noise. That was one of my concerns when I rebuilt the compressor.
Now I can vacuum and charge.
Does it take 112 ounces of R12, or did you just buy some extra?
Thanks...Depress one of the two shraeder valves and see if there is any pressure in the system. If you don't hear the hiss of gas, the system is empty and you can disconnect.
If it's full, i doubt you can get a recover machine to the car to properly pull it out. There are ways to recover without a machine, but it's tricky to really do.