NEED HELP! (cams,tuning)

coolstang07

New Member
Jun 11, 2011
5
0
0
West Babylon, NY
Well brand new to this site and I am looking for some help. I have a set of hot rod cams that I want to get installed and tuned. I talked to one shop and they said that cam install is $600 and tuning is $400. Also I would have to buy a sct tuner for another $400. A couple questions I have are; 1) do those prices sound about right for the ny area? 2) I already own a diablosport predator tuner, does that do the same thing as a sct tuner?3) anyone in the ny/long island area know of a good shop?

Any help at all would be appreciated. I have had these cams for over a year and I really want them installed. If I knew anything at all about cars I would have tried the install myself.

I have a 07 gt automatic with no mods other than axle back exhaust.

Can anyone tell me if offroad x-pypes are legal? My goal is to have a badass lopey sound. Heard that x-pypes can get that sound I want. I would pretty much pay whatever for that sound. Again any help would be cool.
 
  • Sponsors(?)


SpartaPerformance

10 Year Member
Nov 5, 2006
2,517
61
89
45
Long Island NY
www.spartaperformance.com
Sounds right. I don't know any shops here on L.I. that have software to tune via Diablosport. If you want to save the money on the tuner and tuning by having the shop just install the cams and finding a tune shop that can email you a tune for the diablosport. Just make sure that shop is reputable. Also I hope you chose one of the better L.I. shops out there.
 

coolstang07

New Member
Jun 11, 2011
5
0
0
West Babylon, NY
I haven't exactly fully decided who will do it yet. But the prices are from real speed automotive in Bohemia, NY. I still want to check around for any better possibilities.
 
Thread starter Similar threads Forum Replies Date
T Engine need help with engine build/cam selection Fox 5.0 Mustang Tech 2
M Need help deciding on a cam 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 5
9 Need Help on what I need - New to the game 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 4
K Loose Cam Follower, need help! Video included 1996 - 2004 SN95 Mustang -General/Talk- 9
StangLee 02GT Need HELP on XE268H CAMS 1996 - 2004 SN95 Mustang -General/Talk- 2
L Need Help Deciding Type Of Cam To Put In 65 Stang 1965 - 1973 Classic Mustangs -General/Talk- 6
2/75TH RANGER Need Some Help. Cam Question 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 14
H Need Help Selecting A Cam 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 15
Rene martinez Harness , Sensor, Cam, Perhaps Electrical Issue - Need Help? 2005 - 2014 S-197 Mustang -General/Talk- 3
Nicholas Bracy Need Help With Cam Id 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 0
kmcgr6 Need Help Choosing A Cam. 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 18
MLee23 Fox Aod W/ Crane 444225 Cam - Need Help Choosing Torque Converter!! 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 7
805mustang Help!!! Need Var Cam Time Live Data Values To Compare With! 2005 - 2009 Specific Tech 0
Edd204 detroit rocker cams or frpp hotrod cams, need help choosing 2005 - 2014 S-197 Mustang -General/Talk- 4
J Need help finding turn signal cancel cam for '68 Mustang Classic Mustang Specific Tech 7
Markus need help with destroyed roller cam Fox 5.0 Mustang Tech 23
SPCChavez the infamous "cam position sensor" code NEED HELP!!! 2005 - 2014 S-197 Mustang -General/Talk- 16
rdharper02 Cam Gurus-Need some help on a camshaft Fox 5.0 Mustang Tech 9
june-1 need help with cam numbers 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 0
T Got the Pi Heads and intake now i need help with a cam 1996 - 2004 SN95 Mustang -General/Talk- 5
M Hey guys, i need some cam help on my 74 maverick Other Auto Tech 1
uhoh5.0 Need help choosing cam? Fox 5.0 Mustang Tech 14
Z Need build help asap )cam, intake ?'s( Fox 5.0 Mustang Tech 1
2 heads and cams need help 1996 - 2004 SN95 Mustang -General/Talk- 4
G need a little help 306 with tfs stage 1 cam Fox 5.0 Mustang Tech 16
Manewaymja2 Need Help with Rockers/Cam/Springs for 302 Edelbrock Heads. Fox 5.0 Mustang Tech 1
D new 331 build need some help with cam selection. Classic Mustang Specific Tech 18
sport200 need help to ID this cam 41R985 WB7377 ON THE CAM Fox 5.0 Mustang Tech 1
8 need cam help. 351 same firing order as 5.0 ho? Fox 5.0 Mustang Tech 13
1 need help finding a cam Fox 5.0 Mustang Tech 0
Dagz Cam question with supercharger Need help ASAP Fox 5.0 Mustang Tech 1
jruppert Need help in choosing cam for 351w 1994 - 1995 Specific Tech 23
T Need help with idle using a ford e cam 1994 - 1995 Specific Tech 3
86nu possible new cam set up need some help Fox 5.0 Mustang Tech 3
SVT-Sinister Need help selecting cam with my setup Fox 5.0 Mustang Tech 2
GTA_V6_Mustang Need help on picking a cam 1994 - 1995 Specific Tech 18
4 possible cam trouble need help SN95 4.6L Mustang Tech 7
R In need of help... Cam issues Fox 5.0 Mustang Tech 6
juiced_94gt Need help with OTS cam for my 331 Fox 5.0 Mustang Tech 13
juiced_94gt Need help with OTS cam for my 331 1994 - 1995 Specific Tech 15
S i need help picking a cam!!!! Fox 5.0 Mustang Tech 11
M Need help deciding on a new cam Classic Mustang Specific Tech 2
L need help for cam info please! Fox 5.0 Mustang Tech 17
SVT-Sinister Need help choosing a CAM 1994 - 1995 Specific Tech 8
M Pro Cam Degreeers. NEED HELP...PLEASE..Long Post! Fox 5.0 Mustang Tech 4
russ1979 need help with cam removal Fox 5.0 Mustang Tech 12
superstroke17 Need some professional help-heads and cam Fox 5.0 Mustang Tech 2
W Help: I need a copy of a N-71 cam card to degree my cam. Fox 5.0 Mustang Tech 1
D Need help w/ my 85 302...cam? GT40 heads? Fox 5.0 Mustang Tech 3
B need help with heads and cams SN95 4.6L Mustang Tech 4
Similar threads