Need help finding reverse switch on transmission

Rogie Stone

Active Member
Feb 21, 2016
41
59
28
I am using a 1987 transmission case and need help identifying the reverse light switch and neutral safety.
4F7317E6-DB8A-4C3A-A726-C91C2FCE38C4.jpeg
 
Last edited:
  • Sponsors (?)


I’m not sure what trans that is but it’s not a T5 out of a V8 car. The NSS would be on the top of the trans near the front and yours doesn’t have that port. Your blue arrow arrow points to the reverse sensor port.
 
Reverse lights

65E49B3D-DD4B-40E3-9DCB-B06CE0A81E75.jpeg


speed sensor
E0BCF46A-F55E-4585-9E29-C613BD8C2CC3.jpeg



there is no nuetral safety physically on the T5. It’s only used on the AOD and jumpered out on a manual trans car in the reverse light harness.

The sensor on top of the T5 is the nuetral Gear Switch. It’s job is to tell the ECU when the trans is in neutral (in parallel with the clutch switch) and adjusts idle strategy accordingly. Without it, you sometimes get a hanging idle. It has nothing to do with the starter circuit.

older t5s do not have it. The boss is not drilled. You’d need to find an 85+ top cover to retrofit it. Withiut it, you should jumper the plug on the clutch switch if you get a hanging idle

1D6AABE6-979E-4C97-954A-F33643F93921.jpeg
 
  • Useful
Reactions: 1 user