need help on picking a torque converter...

[Ryan91Saleen]

my tranny is going out im sending it to the shop this week and i was wondering what torque coverter to get and what about a certain shiftkit?
also i have on order is a fms b-303 cam fms roller rockers and a new mass air meter which i dont now which one to get? any opinions?

 

[black82fiveoh]

maf- I got my first one(c&l) for a good deal- they are easy to recalabrate(buy a new sample tube) for different injectors. alot say the pro-m is the best. I chose the c&l because of the cost to upgrade(30.00)

the trans- Ive been looking at a TCI or an EDGE RACING torque convertor for my girlfriends car!
from what Ive put together both are nice units! Also, maybe instead of a shift kit you could look into a valvebody and a good shifter! maybe not a full manual valvebody, but one you can shift if you want(my girlfriend got a lentech unit-NICE!)
GOOD LUCK

 

[2NDTIME]

In my firebird I bought a Vigilante 3000. Loved it, with stock 3.23s I went from a no spin 1.95-2.05 60'/13.2xs to slight spin 1.7x 60'/12.70 and actually gained a mph

 

[Ryan91Saleen]

but is there a certian stall i need for my b-303 cam?

 

[willys1]

The best TQ for a mustang is the stallion.made by Precision Industries www.converters.com ,their a little pricey but their the best If your on a budget,I hear alot of good things about Edge converters,and their less pricey.

 

[willys1]

but is there a certian stall i need for my b-303 cam?

2800 stall speed with a lock-up converter.

 

[Ryan91Saleen]

willys thats a site for 3m tape

 

[Ryan91Saleen]

http://www.converter.com/stallion.htm

which one? and what is a lockup?

 

[willys1]

http://www.converter.com/stallion.htm

which one? and what is a lockup?

www.converter.com,,try it again.A lock up converter will give you better gas mileage,and make your engine run cooler.