Hey guys, so this is a street car, probably head to the track once in a while (a couple times a year at most). I'm looking to build the suspension so it will handle well while still being comfortable on the street. All that being said I'd like to be able to get mid 12s with the engine.... I spoke with tmoss about getting gt40ps ported but after tracking them down buying them then sending them to ported it seems like it'd be cheaper to get a set of edelbrock cylinder heads.
If I had the gt40's i'd get em ported in a heart beat, but it looks like edlebrock heads are around 600.00 and they're aluminum so i'd be lighter... what do you guys think?
Right now I've got a mainly stock lx 5.0 ( I'll be putting the gt ground effects on though so that's some extra weight)
I have an AOD but I'm swapping to t-5 in the summer.
Engine is bone stock with timing advanced to 14*
X pipe with cats,
mac flowpath mufflers
brothers shorty headers
3.73 gears
subframe connectors
I have an edelbrock performer intake
255lph walboro pump
24# injectors all sitting in my room also waiting to go on.
I'll probably get the MM suspension kit (not the coil over one)
So I'm just looking at cylinder heads to tie everything together
I was planning on going with the crane 2030 cam because I had it on my last car and loved it.
Any input is welcome, thanks guys
If I had the gt40's i'd get em ported in a heart beat, but it looks like edlebrock heads are around 600.00 and they're aluminum so i'd be lighter... what do you guys think?
Right now I've got a mainly stock lx 5.0 ( I'll be putting the gt ground effects on though so that's some extra weight)
I have an AOD but I'm swapping to t-5 in the summer.
Engine is bone stock with timing advanced to 14*
X pipe with cats,
mac flowpath mufflers
brothers shorty headers
3.73 gears
subframe connectors
I have an edelbrock performer intake
255lph walboro pump
24# injectors all sitting in my room also waiting to go on.
I'll probably get the MM suspension kit (not the coil over one)
So I'm just looking at cylinder heads to tie everything together
I was planning on going with the crane 2030 cam because I had it on my last car and loved it.
Any input is welcome, thanks guys