Need help selecting cam with my setup

[SVT-Sinister]

Sorry about another cam question. I have all the parts in my garage listed below but i still need a cam

331 stroker
HP Turbo Stage 1 60mm turbo
AFR heads 165.... ((i know there to small upgrading later))
HolleySystemax intake

I plan on upgrading my heads later on so keep that in mind. Looking for a cam for this setup. I dont drive the car daily but i dont want a cam that will rattle my teeth either. Thanks

So far i was recommended 35-312-8 .544 .560 lift from Comp Cam

 

[57fairlane]

I would just run an f-cam in that situation.

The turbo sounds small (as well as the heads) to make 600rwhp+ but it will sure make some good torque.

 

[7-UP BILL]

use a stock cam w/ 1.7 RR's. You don't want a cam w/ a lot of overlap.