ere's the specs on my motor;
B50 Sportsman block
8.5:1 compression (150psi on all cylinders, just checked)
Crower Cam
Performer Heads (ported)
Performer RPM intake
It'll be tuned with a tweecer, and has 42lb injectors.
I have a brand new V2 SQ-Trim blower ready to put on, but I only have the stock blower pulleys for the stock 94/95 GT kit.
I am thinking 10-12psi should be plenty, and am assuming it'd make pretty close to 450rwhp with that amount of boost. If in the future I want more I'll intercool it and run closer to 15-17psi.
After I get my taxes I'm dropping it off to get installed/tuned, so I need the pulleys beforehand.
Any help is appreciated.
B50 Sportsman block
8.5:1 compression (150psi on all cylinders, just checked)
Crower Cam
Performer Heads (ported)
Performer RPM intake
It'll be tuned with a tweecer, and has 42lb injectors.
I have a brand new V2 SQ-Trim blower ready to put on, but I only have the stock blower pulleys for the stock 94/95 GT kit.
I am thinking 10-12psi should be plenty, and am assuming it'd make pretty close to 450rwhp with that amount of boost. If in the future I want more I'll intercool it and run closer to 15-17psi.
After I get my taxes I'm dropping it off to get installed/tuned, so I need the pulleys beforehand.
Any help is appreciated.